Martian surface/near-surface water inventory: Sources, sinks, and changes with time
نویسندگان
چکیده
Today, a 34m global equivalent water layer (GEL) lies in the Martian polar-layered deposits and shallow ground ice. During the Amazonian, 3m was outgassed, and 31m was lost to space and to the surface, leaving 62m at the end of Hesperian. During the Hesperian, volcanic outgassing added 5m, 7m was lost, and 40m GEL of groundwater was added to form outflow channels, leaving 24m carryover of surface water from the Noachian into the Hesperian. The Hesperian budget is incompatible with a northern ocean during this era. These figures are for near-surface water; substantial amounts of water may have existed as deep ground ice and groundwater. Our estimate of approximately 24m near-surface water in the Late Noachian is insufficient to support an ocean at that time also and favors episodic melting of an icy highlands to produce the fluvial and lacustrine features.
منابع مشابه
Minimum times to Form Clay in Martian Surface and Near-surface
Introduction: Clay minerals are the most common alteration products of water-rock-gas interactions on Earth. Because these hydrous alteration minerals are thermodynamically stable over a wide range of P-T-x conditions [1], significant amounts of clay may have also formed in Martian environments where liquid water or water vapor was present. It has been speculated that liquid water or vapor may ...
متن کاملDust at the Martian moons and in the circummartian space
The paper provides the current understanding of the dust particle dynamics near the surface and in the circummatrian space of the Martian moons based on existing models developed for airless and nonmagnetized bodies. In particular we discuss the response of the regolith of the Martian moons to exposure to radiation, the dynamics of charged dust on their surfaces, their plasma environments, the ...
متن کاملExperimental Investigation of the Effect of Deionized Water on Surface Roughness of Near Dry Electro Discharge Machining of AISI D2 Steel
The electro discharge machining (EDM), one of the methods used in the machining industry and a non-traditional manufacturing method, the electro erosion process does not depend on the hardness of material and offers a way to process materials of very complex geometry with very fine and high precision by using cheap electrode materials, which make it a preferred method. In this study, effect of ...
متن کاملExperimental Investigation of the Effect of Deionized Water on Surface Roughness of Near Dry Electro Discharge Machining of AISI D2 Steel
The electro discharge machining (EDM), one of the methods used in the machining industry and a non-traditional manufacturing method, the electro erosion process does not depend on the hardness of material and offers a way to process materials of very complex geometry with very fine and high precision by using cheap electrode materials, which make it a preferred method. In this study, effect of ...
متن کاملبهره گیری از سری زمانی داده های ماهواره ای به منظور اعتبارسنجی کانون های شناسایی شده تولید گرد و غبار استان البرز
Dust is one of the common processes of arid and semiarid regions that its occurrence frequencies has increased in recent years in Iran. The proper identification of sand and dust storms (SDS) is particular importance due to its impact on the environment and human health. So far, several methods for identifying these sources have been proposed such as methods based on field studies and geomorpho...
متن کامل