A simple parallel conduction extraction method (SPCEM) for MODFETs and undoped GaN-based HEMTs

We report a simple method to extract the mobility and sheet carrier densities of conduction channels in conventional modulation doped field-effect transistor (MODFET) structures and unintentionally doped GaN-based high-electron mobility transistor (HEMT) structures for a special case. Extraction of the conduction channels from the magnetic field-dependent data can present number of problems; even the most recent methods encounter great difficulties. For the GaN-based HEMT structures which have lower mobilities and larger effective masses than that of GaAs-based counterparts, these difficulties become more prominent. In this study, we describe a simple method for magnetotransport analysis to extract conduction channels successfully for a special case that is commonly encountered: one bulk channel and one two-dimensional electron gas (2DEG) channel. Advantage of this method is mainly its simplicity. The analysis can be done with only two magnetic field-dependent measurements per temperature step. The method is applied to the magnetotransport results of an unintentionally doped AlGaN/AlN/GaN/AlN heterostructure over a temperature range of 29–350K and in a magnetic field range of 0–1.5 T (mBo1). The results are then compared with those obtained using a commercial package for these calculations namely: quantitative mobility spectrum analysis (QMSA). & 2008 Elsevier Ltd. All rights reserved.