Nitrogen-Centered Activators of Peroxide-Reinforced Oxygen Delignification

نویسندگان

  • Dimitris S. Argyropoulos
  • Miro Suchy
  • Leonid Akim
چکیده

In an effort to augment the efficiency of an oxygen delignification stage, we examined the effectiveness of various heterocyclic aromatic nitrogen compounds as possible activators of such a stage. It was shown that a variety of such compounds may act as activators in the presence of hydrogen peroxide, improving the delignification efficiency of oxygen delignification. Among the group of activators examined, 1,10-phenanthroline was found to be the most potent. Injecting the activator in the middle of the delignification stage (simulating a two-stage process) was shown to provide most of the benefits. The optimum injection time was found to at 30 min from the onset of the delignification. At the optimal charge of 1,10-phenanthroline (0.3%), the delignification was improved by 18%. While the presence of copper ions was found to further improve the efficiency of the activating system, this was accompanied by an extensive carbohydrate degradation.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Studies on the mechanism of alkaline peroxide delignification of agricultural residues.

Alkaline solutions of hydrogen peroxide partially delignify wheat straw and other lignocellulosic materials, leaving a cellulosic residue that is highly susceptible to enzymatic digestion by cellulase. The delignification reaction is strongly dependent upon the pH of the reaction mixture, with an optimum at pH 11.5-11.6, pKa for the dissociation H(2)O(2) right harpoon over left harpoon H(+) + H...

متن کامل

Catalysis and activation of oxygen and peroxide delignification of chemical pulps: a review

Environmental regulations coupled to market pressures have forced the pulp and paper industry to explore alternatives to chlorine based bleaching practices for the production of bleached kraft pulp.Various technologies and bleaching chemicals have been suggested as answers to kraft pulp bleaching concerns, from which oxygen, ozone and peroxides are the leading candidates for chlorine replacemen...

متن کامل

Activation of alkaline peroxide delignification using vanadium peroxo complex

HYDROGEN PEROXIDE HAS ALWAYS been a technologically attractive oxidant to the pulp and paper industry, with its significance becoming increasingly important as environmental regulations become more stringent. Beyond its ease of handling and application, hydrogen peroxide is also a versatile and benign compound whose decomposition products are water and oxygen. Among its major drawbacks are its ...

متن کامل

Polyoxometalates in Oxidative Delignification of Chemical Pulps: Effect on Lignin

Chemical pulps are produced by chemical delignification of lignocelluloses such as wood or annual non-woody plants. After pulping (e.g., kraft pulping), the remaining lignin is removed by bleaching to produce a high quality, bright paper. The goal of bleaching is to remove lignin from the pulp without a negative effect on the cellulose; for this reason, delignification should be performed in a ...

متن کامل

The Effect of Delignification Process with Alkaline Peroxide on Lactic Acid Production from Furfural Residues

Furfural residues produced from the furfural industry were investigated as a substrate for lactic acid production by simultaneous saccharification and fermentation (SSF). Alkaline peroxide was used for delignification of furfural residues to improve the final lactic acid concentration. The residue was treated with 1.3% to 1.7% hydrogen peroxide at 80 °C for 1 h with a substrate concentration of...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2004