High Angle of Attack Aerodynamics
نویسنده
چکیده
High angle of attack aerodynamics is inherently associated with: • separated flows, and thus nonlinear aerodynamics > one of the key aspects is the interaction of components, and in particular, vortex flows (vortex bursting is also an important effect) • heavily dependent on wind tunnel testing • connected with flight simulation to ensure good handling qualities > this means that large amounts of data have to be acquired to construct the aero math model. The key tutorials and surveys on high angle of attack aerodynamics were written by Chambers and
منابع مشابه
Modeling Full-Envelope Aerodynamics of Small UAVs in Realtime
This paper focuses on full six degree-of-freedom (6-DOF) aerodynamic modeling of small UAVs at high angles of attack and high sideslip in maneuvers performed using large control surfaces at large deflections for aircraft with high thrust-to-weight ratios. Configurations such as this include many of the currently available propellerdriven RC-model airplanes that have control surfaces as large as...
متن کاملImpact of Body on the Tail Surface Flowfield at High Incidences
An experimental study was performed to investigate the effects of the body angle of attack on the tail surface pressure distribution for a half body-tail combination in subsonic flow. The results show, in small deflection angle regions, that the tail deflection has the same effect on the surface pressure as the body angle of attack. However at moderate to high deflections, the flowfiled caused ...
متن کاملWake instabilities of flow over a spinning circular disk at angle of attack
Submitted for the DFD17 Meeting of The American Physical Society Wake instabilities of flow over a spinning circular disk at angle of attack1 MARCUS LEE, TIM COLONIUS, BEVERLEY MCKEON, Caltech — A circular disk spinning about its axis of rotational symmetry is inherently robust to external disturbances due to gyroscopic moments and is therefore a promising configuration for a robust micro air v...
متن کاملDesign Oriented Aerodynamic Modelling of Wind Turbine Performance
The development of a wind turbine aerodynamics model using a Boundary Integral Equation model (BIEM) is presented. The methodology is valid to study inviscid unsteady flows around three dimensional bodies of arbitrary shape and arbitrarily moving with respect to the incoming flow. The extension of this methodology to study viscosity effects in turbine blade flow at high angle of attack is addre...
متن کاملComprehensive Investigating on the Aerodynamic Influences of the Wheel Contact Patch
Computational fluid dynamics is implemented to investigate the influence of the wheel contact patch on the global car aerodynamics. Two main aspects of the problem are the contact step and patch shape. Three important parameters: step height, cut angle, and tire tread shape are taken into consideration. For validations of the numerical results, the experimental data are also considered. The obt...
متن کامل