Development of Mirror Coatings for Gravitational Wave Detectors
نویسندگان
چکیده
The first detections of gravitational waves, GW150914 and GW151226, were associated with the coalescence of stellar mass black holes, heralding the opening of an entirely new way to observe the Universe. Many decades of development were invested to achieve the sensitivities required to observe gravitational waves, with peak strains associated with GW150914 at the level of 10−21. Gravitational wave detectors currently operate as modified Michelson interferometers, where thermal noise associated with the highly reflective mirror coatings sets a critical limit to the sensitivity of current and future instruments. This article presents an overview of the mirror coating development relevant to gravitational wave detection and the prospective for future developments in the field.
منابع مشابه
Excess mechanical loss associated with dielectric mirror coatings on test masses in interferometric gravitational wave detectors
Interferometric gravitational wave detectors use mirrors whose substrates are formed from materials of low intrinsic mechanical dissipation. The two most likely choices for the test masses in future advanced detectors are fused silica or sapphire (Rowan S et a1 2000 Plzys. Lett. A 265 5). These test masses must be coated to form minors, highly reflecting at 1064 nm. We have measured the excess ...
متن کاملCoating thermal noise of a finite-size cylindrical mirror
Advancement in the reduction of technical noise and isolation of seismic vibration has let a high-precision measurement device like the interferometric gravitational-wave detectors [1] be so sensitive that tiny thermal fluctuation of the measurement surface can limit the sensitivity. It is important to develop a method to estimate the thermalnoise level as accurately as possible. Our study with...
متن کاملMechanical loss in tantala/silica dielectric mirror coatings
Current interferometric gravitational wave detectors use test masses with mirror coatings formed from multiple layers of dielectric materials, most commonly alternating layers of SiO2 (silica) and Ta2O5 (tantala). However, mechanical loss in the Ta2O5/SiO2 coatings may limit the design sensitivity for advanced detectors. We have investigated sources of mechanical loss in the Ta2O5/SiO2 coatings...
متن کاملModel of thermal wave-front distortion in interferometric gravitational- wave detectors. I. Thermal focusing
We develop a steady-state analytical and numerical model of the optical response of power-recycled Fabry– Perot Michelson laser gravitational-wave detectors to nonlinear thermal focusing in optical substrates. We assume that the thermal distortions are small enough that we can represent all intracavity fields as linear combinations of basis functions derived from the eigenmodes of a Fabry–Perot...
متن کاملOptimized multilayer dielectric mirror coatings for gravitational wave interferometers
The limit sensitivity of interferometric gravitational wave antennas is set by the thermal noise in the dielectric mirror coatings. These are currently made of alternating quarter-wavelength high/low index material layers with low mechanical losses. The quarter-wavelength design yields the maximum reflectivity for a fixed number of layers, but not the lowest noise for a prescribed reflectivity....
متن کامل