Link Mass Optimization of Serial Robot Manipulators Using Genetic Algorithm
نویسندگان
چکیده
This paper presents the link mass optimization of a serial robot manipulator based on minimum joint torque requirements that is primary concern in the industrial robot applications. The optimization of link mass globally minimizes joint torques weighted by inverse of inertia matrix. Genetic algorithm (GA) was used to optimize energy produced by robot manipulator. The influences of GA parameters (population sizes and mutation rates) on the solution of this problem were examined by varying these parameters. The rigid body dynamics of a cylindrical three-link serial robot manipulator is used as an optimization model. A fifth order polynomial used for actuating the joints from initial position to the goal position in a smooth manner. The link masses are used as design variables limited to upper, and lower bounds.
منابع مشابه
Estimation and Calibration of Robot Link Parameters with Intelligent Techniques
Abstract: Using robot manipulators for high accuracy applications require precise value of the kinematics parameters. Since measurement of kinematics parameters are usually associated with errors and accurate measurement of them is an expensive task, automatic calibration of robot link parameters makes the task of kinematics parameters determination much easier. In this paper a simple and easy ...
متن کاملDesigning an adaptive fuzzy control for robot manipulators using PSO
This paper presents designing an optimal adaptive controller for tracking control of robot manipulators based on particle swarm optimization (PSO) algorithm. PSO algorithm has been employed to optimize parameters of the controller and hence to minimize the integral square of errors (ISE) as a performance criteria. In this paper, an improved PSO using logic is proposed to increase the convergenc...
متن کاملOptimal Trajectory Planning of a Mobile Robot with Spatial Manipulator For Spatial Obstacle Avoidance
Mobile robots that consist of a mobile platform with one or many manipulators mounted on it are of great interest in a number of applications. Combination of platform and manipulator causes robot operates in extended work space. The analysis of these systems includes kinematics redundancy that makes more complicated problem. However, it gives more feasibility to robotic systems because of the e...
متن کاملMaximum Allowable Dynamic Load of Flexible 2-Link Mobile Manipulators Using Finite Element Approach
In this paper a general formulation for finding the maximum allowable dynamic load (MADL) of flexible link mobile manipulators is presented. The main constraints used for the algorithm presented are the actuator torque capacity and the limited error bound for the end-effector during motion on the given trajectory. The precision constraint is taken into account with two boundary lines in plane w...
متن کاملLink Mass Optimization Using Genetic Algorithms for Industrial Robot Manipulators
Obtaining optimum energy performance is the primary design concern of any mechanical system, such as ground vehicles, gear trains, high speed electromechanical devices and especially industrial robot manipulators. The optimum energy performance of an industrial robot manipulator based on the minimum energy consumption in its joints is required for developing of optimum control algorithms (Delin...
متن کامل