3.6%-CZTSS Device Fabricated From Ionic Liquid Electrodeposited Sn Layer
نویسنده
چکیده
Cu/Sn/Zn stacked layers were electrodeposited and subsequently annealed in a tube furnace in elemental sulfur and selenium at 570oC. Cyclic voltammogram of Sn-salt in ionic liquid was recorded. Thin films were characterized by inductively coupled plasma-mass spectrometry (ICP-MS), Auger electron spectroscopy (AES) and scanning electron microscopy (SEM). The device was characterized by current-voltage (I-V) and quantum efficiency (QE). The device fabricated using electrodeposited precursor film resulted in efficiencies of 3.6%.
منابع مشابه
Cu-Zn-Sn-S Thin Films from Electrodeposited Metallic Precursor Layers
Cyclic voltammogram of ionic liquid and metallic-salts in ionic liquids were recorded. Cu/Sn/Zn stacked layers were electrodeposited and subsequently sulfurized in a tube furnace in elemental sulfur at 550oC. Thin films were characterized by X-ray diffraction, ICP-MS, and SEM. The device was characterized by I-V, QE and Mott-Schottky (capacitance-voltage) plot.
متن کاملThe electrodeposition of zinc alloys from ionic liquid electrolytes
Electrodeposited zinc alloys have long been recognised as effective barrier and sacrificial coatings for ferrous substrates. The effect of alloying zinc with, in the main, more noble metals, has produced finishes of higher corrosion resistance than simply electrodeposited zinc. In this manner zinc alloys such as zinc-nickel, zinc-cobalt and zinc-iron are routinely electrodeposited on an industr...
متن کاملReactions in Electrodeposited Cu/Sn and Cu/Ni/Sn Nanoscale Multilayers for Interconnects
Miniaturization of electronic devices has led to the development of 3D IC packages which require ultra-small-scale interconnections. Such small interconnects can be completely converted into Cu-Sn based intermetallic compounds (IMCs) after reflow. In an effort to improve IMC based interconnects, an attempt is made to add Ni to Cu-Sn-based IMCs. Multilayer interconnects consisting of stacks of C...
متن کاملInorganic Solar Cells Based on Electrospun ZnO Nanofibrous Networks and Electrodeposited Cu2O
The nanostructured ZnO/copper oxide (Cu2O) photovoltaic devices based on electrospun ZnO nanofibrous network and electrodeposited Cu2O layer have been fabricated. The effects of the pH value of electrodeposition solution and the Cu2O layer thickness on the photovoltaic performances have been investigated. It is revealed that the pH value influences the morphology and structure of the Cu2O layer...
متن کاملOn the electrodeposition of titanium in ionic liquids.
The ability to electrodeposit titanium at low temperatures would be an important breakthrough for making corrosion resistant layers on a variety of technically important materials. Ionic liquids have often been considered as suitable solvents for the electrodeposition of titanium. In the present paper we have extensively investigated whether titanium can be electrodeposited from its halides (Ti...
متن کامل