Modelling of Effect of Inflow Turbulence on Large Eddy Simulation of Bluff Body Flows
نویسندگان
چکیده
A random flow generation (RFG) algorithm for a previously established large eddy simulation (LES) code is successfully incorporated into a finite element fluid flow solver to generate the required inflow/initial turbulence boundary conditions for the LES computations of viscous incompressible turbulent flow over a nominally twodimensional circular cylinder at Reynolds number of 140,000. The effect of generated turbulent inflow boundary conditions on the near wake flow and the shear layer and on the prediction of integral flow parameters is studied based on long time average results. No-slip velocity boundary function is used but wall effects are taken into consideration with a near wall modelling methodology based on van Driest Damping approach. The numerical results obtained from simulations are compared with each other and with the experimental data for different turbulent inflow boundary conditions to assess the functionality of the RFG algorithm for the present LES code and hence its influence on the vortex shedding mechanism and the resulting flow field predictions. KeywordsLES method, RFG algorithm, circular cylinder, turbulent wake
منابع مشابه
Large-eddy simulation of turbulent flow over an array of wall-mounted cubes submerged in an emulated atmospheric boundary-layer
Turbulent flow over an array of wall-mounted cubic obstacles has been numerically investigated using large-eddy simulation. The simulations have been performed using high-performance computations with local cluster systems. The array of cubes are fully submerged in a simulated deep rough-wall atmospheric boundary-layer with high turbulence intensity characteristics of environmental turbulent fl...
متن کاملتحلیل روشهای مختلف تولید آشفتگی ورودی در رهیافت شبیهسازی گردابههای بزرگ برای پیشبینی پراکندگی آلایندهها در اطراف ساختمانهای مدل
The purpose of the present study is to investigate and analyze numerically, the effective mechanisms on the flow field and pollutant dispersion around a simple and long street canyon by means of Large Eddy Simulation (LES) approach using various inflow turbulence generation methods. For this purpose, four methods i.e. vortex, mapping, synthetic and no-inlet perturbation methods are used as infl...
متن کاملBlood Flow Simulation in an Aorta with a mild coarctation Using Magnetic Resonance Angiography and Finite Volume Method
Coarctation of the aorta is one of the five main congenital cardiovascular failures, accounting for 6–8 percent of these failures. This research aimed to simulate the blood flow of a seventeen-year-old male teen with a mild coarctation at one-third of his aorta's descending branch. The simulation was performed by extracting the domain and the input pulsatile velocity signal as the boundary cond...
متن کاملInflow turbulence generation for LES of wind flow around bluff body
Large eddy simulation (LES) has been widely applied in wind-related problems. A key issue to ensure obtaining accurate results by LES is to generate an appropriate inflow field satisfying the physical wind characteristics in the atmospheric boundary layer (ABL). The methods adopted in this study for inflow field generation include two statistical methods (the random flow generation method (RFG)...
متن کاملLarge eddy simulation of flows around ground vehicles and other bluff bodies.
A brief review of large eddy simulation (LES) applications for different bluff-body flows performed by the author and his co-workers is presented. Examples of flows range from simple cube flows characterized by sharp edge separation over a three-dimensional hill where LES relies on good near-wall resolution, to complex flows of a tall, finite cylinder that contains several flow regimes that cau...
متن کامل