Efficient Fabrication of Nanoporous Si and Si/Ge Enabled by a Heat Scavenger in Magnesiothermic Reactions
نویسندگان
چکیده
Magnesiothermic reduction can directly convert SiO2 into Si nanostructures. Despite intense efforts, efficient fabrication of highly nanoporous silicon by Mg still remains a significant challenge due to the exothermic reaction nature. By employing table salt (NaCl) as a heat scavenger for the magnesiothermic reduction, we demonstrate an effective route to convert diatom (SiO2) and SiO2/GeO2 into nanoporous Si and Si/Ge composite, respectively. Fusion of NaCl during the reaction consumes a large amount of heat that otherwise collapses the nano-porosity of products and agglomerates silicon domains into large crystals. Our methodology is potentially competitive for a practical production of nanoporous Si-based materials.
منابع مشابه
Optimization of the nanoporous silicon structures by magnesiothermic reduction of the as-synthesized silica
Nanoporous silicon powder was produced via efficient magnesiothermic reduction. In this work, the thermal effect and reduction process time were investigated on the porous silicon structure. The nanoporous silicon powders were characterized by X-ray diffraction analysis and field emission scanning electron microscopy. The results demonstrate that porous structure was changed to homogeneous and...
متن کاملLarge-scale fabrication, 3D tomography, and lithium-ion battery application of porous silicon.
Recently, silicon-based lithium-ion battery anodes have shown encouraging results, as they can offer high capacities and long cyclic lifetimes. The applications of this technology are largely impeded by the complicated and expensive approaches in producing Si with desired nanostructures. We report a cost-efficient method to produce nanoporous Si particles from metallurgical Si through ball-mill...
متن کاملSimulation of Fabrication toward High Quality Thin Films for Robotic Applications by Ionized Cluster Beam Deposition
The most commonly used method for the production of thin films is based on deposition of atoms or molecules onto a solid surface. One of the suitable method is to produce high quality metallic, semiconductor and organic thin film is Ionized cluster beam deposition (ICBD), which are used in electronic, robotic, optical, optoelectronic devices. Many important factors such as cluster size, cluster...
متن کاملComparison of the effect of Si and Ge presence on phase formation process, the structural and magnetic properties of Co2FeX (X=Ge,Si) Heusler compounds
In this study, the Co2FeX (X=Ge, Si) Heusler compounds with 30 valence electrons, which are made by using mechanical alloying and arc melting methods were studied. The crystallization of samples was confirmed by XRD data in both manufacturing methods. The results showed that the presence of Si than Ge in the compound played a more effective role to creation a large scale atomic ordering, and th...
متن کاملFabrication of Coaxial Si1−xGex Heterostructure Nanowires by O2 Flow-Induced Bifurcate Reactions
We report on bifurcate reactions on the surface of well-aligned Si(1-x)Ge(x) nanowires that enable fabrication of two different coaxial heterostructure nanowires. The Si(1-x)Ge(x) nanowires were grown in a chemical vapor transport process using SiCl(4) gas and Ge powder as a source. After the growth of nanowires, SiCl(4) flow was terminated while O(2) gas flow was introduced under vacuum. On th...
متن کامل