A Silicon-29 Nuclear Magnetic Resonance Study of Silicon-Aluminum Ordering in Leucite and Analcite

نویسندگان

  • J. B. Murdoch
  • J. F. Stebbins
  • A. Pines
چکیده

Silicon-29 magic-angle-spinning NMR spectroscopy has been used to investigate the silicon-aluminum distribution in natural samples of analcite and leucite (before and after heat treatment) as well as a leucite synthesized from a gel. Three different simulation programs have been developed to fit the experimental spectra. For two we assume a different aluminum occupancy fraction g~ for each of the three crystallographically distinct tetrahedral sites T~ in leucite and some degree of aluminum avoidance, but an otherwise random arrangement of tetrahedral cations. A third program interchanges A1 and Si cations on a lattice of 3 x 3 x 3 unit cells to generate an optimized fit. All models predict that the T2 sites in natural leucite are deficient in aluminum: g ~ 0 . 3 9 , g2~0.16, and g3~0.42 for the fractional A1 occupancy at each site, with apparently strict aluminum avoidance. Heat treatment of the sample at 1673 K for a week has little effect on the gz values but may create some A 1 O A 1 linkages. In the gel-synthesized leucite, A1 occupancies are slightly more uniform than in natural leucite: gl ~ 0.36, g2 ~ 0.20, and g3 ~ 0.42. For analcite, two distinctly different Si, A1 distributions are obtained: (A) g l=g3~0.09, g2~0.78 and (B) g l=g3 ~0.46, g2~0.04. Additional NMR measurements on an ion-exchanged sample or an accurate determination of unitcell dimensions could resolve this ambiguity.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Computation of the NMR Parameters of H-Capped (10,0) and (5,5) Single-Walled SiC Nanotubes

Geometrical structure, nuclear magnetic resonance (N1,1It) chemical shielding tensors, and chemical shiftsof silicon and carbon nucler are investigated for twn infinite size zigzag and armchair single-walled siliconcarbide nanotabes (SiCNTs). Geometrical structures of SieNTs, Sit bonds and bond angles of St and Cvertices in both zigzag and armchair nanotubes, Indicate that bond lengths are appr...

متن کامل

Effects of Aluminum, Silicon And Ferro Silicon Anti Oxidants in MgO C Refractories

  Three different materials (aluminum, ferro -silicon and silicon) were used as antioxidants in order to prevent the decarburization process and to keep and/or increase the final properties in MgO-C refractories. Their effects were compared by measuring the physical and mechanical properties as well as oxidation and the resultant phases and microstructures, in the temperature range of 200-1600 ...

متن کامل

Solid-state NMR characterisation of the thermal transformation of a Hungarian white illite.

(1)H, (27)Al, (29)Si and (39)K solid-state NMR are reported from a Hungarian illite 2:1 clay for samples heated up 1600 degrees C. This single-phase sample has a small amount of aluminium substitution in the silica layer and very low iron-content ( approximately 0.4wt%). Thermal analysis shows several events that can be related to features in the NMR spectra, and hence changes in the atomic sca...

متن کامل

A Contribution to the Genesis of Analcite after Leucite in Potassic Volcanic Rocks of the Nadik Area, Kerman, Iran

The origin of analcite-bearing lavas and potassic volcanic rocks is controversial in the geological record. Two main hypotheses are either primary analcite or replacement pseudomorphous of leucite. Spectacular large (5 cm) euhedral trapezohedra occur as single crystals of analcite in tephriphonolite lavas from Nadik area. Based on the following evidences the large analcite trapezohedra from Nad...

متن کامل

Effect of Aluminum on Microstructure and Thickness of Galvanized Layers on Low Carbon silicon-Free Steel

In hot dip galvanizing, several parameters such as chemical composition of coating bath, immersion time and surface roughness of specimens could affect microstructure and properties of coating. In this article, the effect of aluminum content, immersion time and surface roughness on structure and properties of alloy layers have been investigated. Specimens of low carbon silicon-free steel with d...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2004