Wideband Microstrip-fed Printed Bow-tie Antenna for Phasedarray Systems
نویسندگان
چکیده
A micro strip-fed printed bow-tie antenna is presented inorder to achieve wide bandwidth, high gain, and size reduction. A comparisonbetween the bow-tie and the quasi-Yagi (dipole and director)antennas shows that the bow-tie antenna has a wider bandwidth, highergain, lower front-to-back ratio, lower crosspolarization level, andsmaller size. Two-element arrays are designed and their characteristics are compared. The bow-tie antenna yields lower coupling for the same distance between elements.
منابع مشابه
Design and Implementation of a Compact Super-Wideband Printed Antipodal Antenna Using Fractal Elements
A compact printed fractal antipodal bow-tie antenna is designed and implemented to simultaneously cover the operations in the C, X, and Ku-bands. It is demonstrated that by addition of small fractal elements at the sides of hexagonal arms of the bow-tie, a wide operating frequency range of 3.3 to 19.1 GHz can be covered while antenna size is only 30×34×1.2 mm3. In order to match the antenna to ...
متن کاملWideband Microstrip-fed Printed Bow-tie Antenna for Phased- Array Systems
A microstrip-fed printed bow-tie antenna is presented in order to achieve wide bandwidth, high gain, and size reduction. A comparison between the bow-tie and the quasi-Yagi (dipole and director) antennas shows that the bow-tie antenna has a wider bandwidth, higher gain, lower front-to-back ratio, lower cross-polarization level, and smaller size. Two-element arrays are designed and their charact...
متن کاملUWB Planar Conical Horn-Shaped Self-Complementary Bow-Tie Antenna
An ultra-wideband (UWB) self-complementary planar bow-tie antenna (SCPBTA) is proposed. The antenna consists of a printed conical horn-shaped (CHS) radiator and a counterpart CHS slot etched on a rectangular ground plane. The printed CHS radiator is connected directly to the 50Ω microstrip line by bending the end portion of the feed line. As a result, the antenna has a simple structure which do...
متن کاملA Capacitive Fed Microstrip Patch Antenna with Air Gap for Wideband Applications (RESEARCH NOTE)
In this paper a microstrip antenna on a suspended substrate with capacitive feed is presented. capacitive feed is created by a slot within the rectangular patch around the feed point. The proposed antenna exhibits a much higher impedance bandwidth of about 47% (S11 < −10 dB). Effects of key design parameters such as the air gap between the substrate and the ground plane, the gap width between r...
متن کاملA Broadband Printed Bow-tie Antenna with a Simplified Balanced Feed
A broadband printed bow-tie antenna with a simplified balanced feeding network and modified tapering is presented. Microstrip and parallel-strip transmission lines printed on the substrate with high dielectric permittivity realize the proposed feeding network. The ground-plane transition between the microstrip line and the parallel-strip line is exponentially tapered so as to reduce the reflect...
متن کامل