Elimination of siloxanes by adsorption process as a way of upgrading biogas
نویسندگان
چکیده
Biogas is increasingly being investigated as a source of renewable energy, however its utilisation requires an improvement of its quality. Certain biogases contain compounds called siloxanes; these compounds are the origin of some problems when using biogas. At high temperatures siloxanes are transformed to silicate oxides which can damage equipment (i.e. engines corrosion, the clogging of fuel cell membranes.). This paper provides details of the research done in the treatment of siloxane by adsorption process of adsorption. Different porous materials were studied in order to evaluate adsorption capacities. Influences of humidity and temperature on the mass transfer were evaluated. Moreover, reactors were filled with a mixture of methane and carbon dioxide (principal compounds on the biogas) in order to evaluate the impact of the gas composition in the adsorption capacities. Finally the capacity of adsorption is also evaluated in the presence of an organic volatile compound (VOC). Activated carbon cloth was chosen to continue with the experiences realised for the adsorption – desorption process. This porous material has shown good adsorption capacities. Furthermore, desorption process can be performed in situ and their implementation in industrial process is more easy. Adsorption-desorption cycles were performed and the possibilities of the material regeneration evaluated. Joule effect was employed in the desorption process in order to reduce the duration of regeneration. First cycles have been accomplished. Results are promising, even if the operational conditions of the process must be optimised.
منابع مشابه
Comparative Studies on Methane Upgradation of Biogas by Removing of Contaminant Gases Using Combined Chemical Methods
Biogas, which generated from renewable sources can be used as a sustainable energy to achieve resourceful targets of biofuel for internal combustion engines. This process can be achieved in combined absorption and adsorption chemical way. This method can be employed by aqueous solutions of calcium hydroxide, activated carbon, iron(II) chloride, silica gel and sodium sulfate respectively. The pr...
متن کاملApproaches concerning siloxane removal from biogas * A review
Soreanu, G., M. Béland, P. Falletta, K. Edmonson, L. Svoboda, M. Al-Jamal and P. Seto. 2011. Approaches concerning siloxane removal from biogas * A review. Canadian Biosystems Engineering/Le génie des biosystèmes au Canada. 53: 8.1 8.18. One of the major barriers to the use of biogas as an alternative renewable energy source is the presence of siloxanes. At combustion temperatures, siloxanes ar...
متن کاملDesign and construction of a helium purification system using cryogenic adsorption process
One of the most appropriate methods for elimination of trace impurities in helium is cryogenic adsorption process. So, in this study design and construction of cryogenic adsorption helium purification system (3 Nm3.hr-1, 80 bar) carried out using activated carbon as adsorbent at 77K. To evaluation of adsorption dynamics and effect of pressure on elimination of trace impurities, helium purificat...
متن کاملSelected Methods of Advanced Biogas Upgrading
The upgrading of biogas for the production of biomethane to be injected to the natural gas grid has gained significant importance in recent years. It is often considered to be superior to the production of electricity and district heat with internal combustion engines mainly because of better energy utilisation, higher flexibility and beneficial economic prospects. Biogas upgrading is commonly ...
متن کامل