A field assessment of the value of steady shape hydraulic tomography for characterization of aquifer heterogeneities
نویسندگان
چکیده
[1] Hydraulic tomography is a promising approach for obtaining information on variations in hydraulic conductivity on the scale of relevance for contaminant transport investigations. This approach involves performing a series of pumping tests in a format similar to tomography. We present a field-scale assessment of hydraulic tomography in a porous aquifer, with an emphasis on the steady shape analysis methodology. The hydraulic conductivity (K) estimates from steady shape and transient analyses of the tomographic data compare well with those from a tracer test and direct-push permeameter tests, providing a field validation of the method. Zonations based on equal-thickness layers and cross-hole radar surveys are used to regularize the inverse problem. The results indicate that the radar surveys provide some useful information regarding the geometry of the K field. The steady shape analysis provides results similar to the transient analysis at a fraction of the computational burden. This study clearly demonstrates the advantages of hydraulic tomography over conventional pumping tests, which provide only large-scale averages, and small-scale hydraulic tests (e.g., slug tests), which cannot assess strata connectivity and may fail to sample the most important pathways or barriers to flow.
منابع مشابه
Steady shape analysis of tomographic pumping tests for characterization of aquifer heterogeneities
[1] Hydraulic tomography, a procedure involving the performance of a suite of pumping tests in a tomographic format, provides information about variations in hydraulic conductivity at a level of detail not obtainable with traditional well tests. However, analysis of transient data from such a suite of pumping tests represents a substantial computational burden. Although steady state responses c...
متن کاملA Field Proof-of-Concept of Aquifer Imaging Using 3-D Transient Hydraulic Tomography with Modular, Temporarily-Emplaced Equipment
[1] Hydraulic tomography is a field scale aquifer characterization method capable of estimating 3-D heterogeneous parameter distributions, and is directly sensitive to hydraulic conductivity (K), thus providing a useful data source for improving flow and transport models. We present results from a proof-of-concept field and modeling study in which we apply 3-D transient hydraulic tomography (3D...
متن کاملA potential-based inversion of unconfined steady-state hydraulic tomography.
The importance of estimating spatially variable aquifer parameters such as transmissivity is widely recognized for studies in resource evaluation and contaminant transport. A useful approach for mapping such parameters is inverse modeling of data from series of pumping tests, that is, via hydraulic tomography. This inversion of field hydraulic tomographic data requires development of numerical ...
متن کاملManagement of groundwater resources of Mahvelat-Faizabad aquifer and evaluation of extent of saline water zone using numerical simulation
The unmanaged groundwater extraction and inadequate aquifer recharge is the major cause of groundwater depletion in different parts of the world. In this study, the groundwater flow system of Mahvelat-Feizabad aquifer (NE of Iran) has been numerically simulated using MODFLOW code in the GMS interface. The model, primarily, calibrated for steady state condition for the mean hydraulic values of o...
متن کاملCharacterization of aquifer heterogeneity using transient hydraulic tomography
[1] Hydraulic tomography is a cost-effective technique for characterizing the heterogeneity of hydraulic parameters in the subsurface. During hydraulic tomography surveys a large number of hydraulic heads (i.e., aquifer responses) are collected from a series of pumping or injection tests in an aquifer. These responses are then used to interpret the spatial distribution of hydraulic parameters o...
متن کامل