Determining the influential depth for surface reflectance of sediment by BRDF measurements.
نویسندگان
چکیده
We measure the Bi-directional reflectance distribution function (BRDF) of ooid sand layers with three particle size distributions (0.5-1mm, 0.25-0.5mm and 0.125-0.25mm) and layer thicknesses on a reflecting mirror to determine the influential depth in the optical region at wavelengths of 658 nm (red), 570 nm (green) and 457 nm (blue). The hemispherical reflectance (albedo) was used as an indicator of BRDF changes between different layers. Measurements are carried out on both dry and water wetted grains. The results indicate that for both dry and wet and all size distributions, the influential depth is at most 2mm.
منابع مشابه
Bidirectional reflectance measurements of sediments in the vicinity of Lee Stocking Island, Bahamas
In situ measurements of bidirectional reflectance factors (REFFs) are presented for submerged carbonate sediments at six sites in the vicinity of Lee Stocking Island. Sediment grain sizes ranged from 400 mm to .1000 mm. Several features were common to all data sets. Although overall sediment reflectance varied spectrally, normalized REFF was independent of wavelength within the natural sample v...
متن کاملA Theory of Photometric Reconstruction for Unknown Isotropic Reflectances
This paper presents a comprehensive theory of surface reconstruction from image derivatives in photometric stereo. For an object with an unknown, general isotropic BRDF, we show that just two measurements of the spatial and temporal image derivatives, under unknown light source positions on a circle, suffice to determine the surface. This result is the culmination of a series of fundamental obs...
متن کاملEffects of optically shallow bottoms on upwelling radiances: Bidirectional reflectance distribution function effects
Radiative transfer simulations were carried out for a variety of measured and modeled benthic bidirectional reflectance distribution functions (BRDFs), incident lighting conditions, bottom depths, and water inherent optical properties. These simulations quantify the errors that occur in predictions of above-surface remote-sensing reflectances and in-water upwelling radiances if non-Lambertian o...
متن کاملIn Situ Brdf Measurements of Selected Surface Materials to Improve Analysis of Remotely Sensed Multispectral Imagery
The spectral bidirectional reeectance distribution function (BRDF) of selected artiicial surfaces (e. g. roof materials) was measured under natural illumination. Data were obtained with a spectrometer in the wavelength range 600 nm { 900 nm with a spectral resolution of 5 nm, using 61 spectral bands. The samples were placed on a goniometer, which allowed to set all the desired angles of inciden...
متن کاملDevelopment Of An Operational Procedure To Estimate Surface Albedo From The SEVIRI/MSG Observing System In Using Polder BRDF Measurements
A statistical inversion method is presented in support to the application of kernel-based BRDF (Bi-directional Reflectance Distribution Function) models for the calculation of the surface albedo. We present an operational procedure for the inversion of kernel-driven BRDF model and further albedo retrieval to be applicable to the SEVIRI/MSG reflectance measurements. The processing steps applied ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Optics express
دوره 11 21 شماره
صفحات -
تاریخ انتشار 2003