Molecular beam epitaxy of GeTe-Sb2Te3 phase change materials studied by X-ray diffraction
نویسندگان
چکیده
The integration of phase change materials into semiconductor heterostructures may lead to the development of a new generation of high density non-volatile phase change memories. Epitaxial phase change materials allow to study the detailed structural changes during the phase transition and to determine the scaling limits of the memory. This work is dedicated to the epitaxial growth of Ge-Sb-Te phase change alloys on GaSb(001). We deposit Ge-Sb-Te (GST) films on GaSb(001) substrates by means of molecular beam epitaxy (MBE). The film orientation and lattice constant evolution is determined in real time during growth using grazing incidence X-ray diffraction (GID). The nucleation stage of the growth is studied in situ using reflection high energy electron diffraction (RHEED). Four growth regimes of GST on GaSb(001) were observed: amorphous, polycrystalline, incubated epitaxial and direct epitaxial. Amorphous film grows for substrate temperatures below 100 ◦C. For substrate temperatures in the range 100–160 ◦C, the film grows in polycrystalline form. Incubated epitaxial growth is observed at temperatures from 180 to 210 ◦C. This growth regime is characterized by an initial 0.6 nm thick amorphous layer formation, which crystallizes epitaxially as the film thickness increases. The determined lattice constant of the films is 6.01Å, very close to that of the metastable GST phase. The films predominantly possess an epitaxial cube-on-cube relationship. At higher temperatures the films grow epitaxially, however the growth rate is rapidly decreasing with temperature. At temperatures above 270 ◦C the growth rate is zero. The composition of the grown films is close to 2:2:5 for Ge, Sb and Te, respectively. The determined crystal structure of the films is face centered cubic (FCC) with a rhombohedral distortion. The analysis of X-ray peak widths gives a value for the rhombohedral angle of 89.56 ◦. We observe two types of reflections in reciprocal space indicating two FCC sublattices in the structure. The analysis of X-ray structure factors give the same averaged electron density ratio in the two FCC sublattices as in the GeTe or the metastable Ge2Sb2Te5 with 20% vacancies. No tetrahedrally coordinated atoms are observed.
منابع مشابه
Vapor-liquid-solid and vapor-solid growth of phase-change Sb2Te3 nanowires and Sb2Te3/GeTe nanowire heterostructures.
We report the synthesis and characterization of radial heterostructures composed of an antimony telluride (Sb2Te3) core and a germanium telluride (GeTe) shell, as well as an improved synthesis of Sb2Te3 nanowires. The synthesis of the heterostructures employs Au-catalyst-assisted vapor-liquid-solid (VLS) and vapor-solid (VS) mechanisms. Energy-dispersive X-ray spectrometry indicates that Sb and...
متن کاملPulsed laser deposited GeTe-rich GeTe-Sb2Te3 thin films
Pulsed laser deposition technique was used for the fabrication of Ge-Te rich GeTe-Sb2Te3 (Ge6Sb2Te9, Ge8Sb2Te11, Ge10Sb2Te13, and Ge12Sb2Te15) amorphous thin films. To evaluate the influence of GeTe content in the deposited films on physico-chemical properties of the GST materials, scanning electron microscopy with energy-dispersive X-ray analysis, X-ray diffraction and reflectometry, atomic fo...
متن کاملThermal stability of CdZnO thin films grown by molecular-beam epitaxy
CdZnO thin films with near-band-edge (NBE) photoluminescence (PL) emission from 2.39eV to 2.74 eV were grown by plasma-assisted molecular-beam epitaxy on c-plane sapphire substrates with 800 ◦C in situ annealing. CdZnO thin films evolve from purewurtzite (wz) structure, tomixture of wz and rock-salt (rs) structures confirmed by X-ray diffraction studies. Rapid-thermo-annealing (RTA) was perform...
متن کاملOperation and device applications of a valved-phosphorus cracker in solid-source molecular-beam epitaxy
Solid phosphorus is successfully incorporated into a molecular-beam epitaxy system by a valved-cracker for the growth of phosphorus-based materials. The operating parameters are established through beam flux and reflection high-energy electron diffraction measurements. InP and InGaP lattice matched to GaAs were grown and characterized by Hall measurements, photoluminescence, electroreflectance,...
متن کاملReflection High - Energy Electron Diffraction oscillations during epitaxial growth of artificially layered films of ( BaCuO x ) m / ( CaCuO
Pulsed Laser Deposition in molecular-beam epitaxy environment (Laser-MBE) has been used to grow high quality BaCuO x /CaCuO 2 superlattices. In situ Reflection High Energy Electron Diffraction (RHEED) shows that the growth mechanism is 2-dimensional. Furthermore, weak but reproducible RHEED intensity oscillations have been monitored during the growth. Ex-situ x-ray diffraction spectra confirmed...
متن کامل