Low-Cost Gas Sensors Produced by the Graphite Line-Patterning Technique Applied to Monitoring Banana Ripeness
نویسندگان
چکیده
A low-cost sensor array system for banana ripeness monitoring is presented. The sensors are constructed by employing a graphite line-patterning technique (LPT) to print interdigitated graphite electrodes on tracing paper and then coating the printed area with a thin film of polyaniline (PANI) by in-situ polymerization as the gas-sensitive layer. The PANI layers were used for the detection of volatile organic compounds (VOCs), including ethylene, emitted during ripening. The influence of the various acid dopants, hydrochloric acid (HCl), methanesulfonic acid (MSA), p-toluenesulfonic acid (TSA) and camphorsulfonic acid (CSA), on the electrical properties of the thin film of PANI adsorbed on the electrodes was also studied. The extent of doping of the films was investigated by UV-Vis absorption spectroscopy and tests showed that the type of dopant plays an important role in the performance of these low-cost sensors. The array of three sensors, without the PANI-HCl sensor, was able to produce a distinct pattern of signals, taken as a signature (fingerprint) that can be used to characterize bananas ripeness.
منابع مشابه
Improving Gas Sensing Properties of Tin Oxide Nanowires Palladium-Coated Using a Low Cost Technique
Thin films of SnO2 nanowires were successfully prepared by using chemical vapor deposition (CVD) process on quartz substrates. Afterwards, a thin layer of palladium (Pd) as a catalyst was coated on top of nanowires. For the deposition of Pd, a simple and low cost technique of spray pyrolysis was employed, which caused an intensive enhancement on the sensing response of fabricated sensors...
متن کاملRemoval of Basic Blue 159 from Aqueous Solution Using Banana Peel as a Low-Cost Adsorbent
In this paper, the adsorption of Basic Blue159 (BB159) onto banana peel as a low-cost material was studied. At first, the banana peel was sieved. Later, banana peel particles were characterized by field emission scanning electron microscopy (FESEM), energy dispersive x-ray spectroscopy (EDXS) and Fourier Transform Infrared (FTIR) techniques. Batch adsorption experiments were carried out as a fu...
متن کاملGraphite patterning in a controlled gas environment.
Although a number of methods using scanning probe lithography to pattern graphene have already been introduced, the fabrication of real devices still faces limitations. We report graphite patterning using scanning probe lithography with control of the gas environment. Patterning processes using scanning probe lithography of graphite or graphene are normally performed in air because water molecu...
متن کاملRadiation Effects on the On-line Monitoring System of a Hadrontherapy Center
Introduction Today, there is a growing interest in the use of hadrontherapy as an advanced radiotherapy technique. Hadrontherapy is considered a promising tool for cancer treatment, given its high radiobiological effectiveness and high accuracy of dose deposition due to the physical properties of hadrons. However, new radiation modalities of dose delivery and on-line beam monitoring play crucia...
متن کاملA Pitch-Catch Based Online Structural Health Monitoring of Pressure Vessels, Considering Corrosion Formation
Structural health monitoring is a developing research field which is multifunctional and can estimate the health condition of the structure by data analyzing and also can prognosticate the structural damages. Illuminating the damages by using piezoelectric sensors is one of the most effective techniques in structural health monitoring. Pressurized equipments are very important components in pro...
متن کامل