EMC analysis of static converters by the extraction of a complete equivalent circuit via a dedicated PEEC method

نویسندگان

  • Vincent ARDON
  • Edith CLAVEL
  • Olivier CHADEBEC
  • Jean-Michel GUICHON
  • Patrice LABIE
چکیده

 This paper presents an application of an adapted (R-L-M-C) PEEC method dedicated to the extraction of equivalent circuit of power electronics devices. Two dedicated integral methods with different meshes are used to compute either resistive and inductive elements or capacitive couplings. The adaptive multi-level fast multipole method (AMLFMM) is presented to extract parasitic capacitances on large geometries. By coupling these two methods, an equivalent circuit with lumped elements is obtained. Consequently, EMC simulations on a wide frequency range are feasible by means of a SPICE-like tool. These methods have been applied to a boost converter.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Adaptive Building of Accurate and Stable PEEC Models for EMC Applications

A new adaptive technique is presented for building accurate and stable Partial Element Equivalent Circuit (PEEC) models over a wide frequency range. Rational models are generated for impedances corresponding to partial inductances and coefficients of potential over a frequency range of interest, based on a limited number of samples. Delay extraction is applied in order to keep the order of the ...

متن کامل

Performance Analysis of Parallel Non- Orthogonal Peec-based Solver for Emc Applications

A parallel implementation of a quasi-static Partial Element Equivalent Circuit (PEEC)-based solver that can handle electromagnetic problems with non-orthogonal structures is presented in this paper. The solver has been written in C++ and employs GMM++ and ScaLAPACK computational libraries to make the solver fast, efficient, and adaptable to current parallel computer systems. The parallel PEEC-b...

متن کامل

Variable Speed Wind Turbine DFIG Back to Back Converters Open-Circuit Fault Diagnosis by Using of Combiniation Signal-Based and Model-Based Methodes

Condition monitoring (CM) and Fault Detection (FD) of wind turbine lead to increase in reliability and availability of turbine. IGBT open circuit of wind turbine converter will bring about depletion in output current of converter and as a result, reduction in production of wind turbine power. In this research, back to back converter IGBT open - gate fault for wind turbine based on DFIG is detec...

متن کامل

A New ZVZCS Isolated Dual Series Resonant DC-DC Converter with EMC Considerations

A novel ZVZCS isolated dual series-resonant active-clamp dc–dc converter is proposed to obtain high efficiency. The proposed converter employs an active-clamp technique, while a series-resonant scheme controls the output voltage with the complementary pulse width modulation controller. The active-clamp circuit serves to recycle the energy stored in the leakage inductance or the magnetizing ...

متن کامل

New Coupling between Peec Method and an Integro-differential Approach for Modeling Solid Conductors in the Presence of Magnetic-conductive Thin Plates

In order to introduce magnetic conductive thin plates in quasi-static PEEC method, a coupling with the integrodifferential method is proposed. This coupling enables to take the advantage of each method. The complex conductor geometry is achieved thanks to the PEEC method. The modeling of thin plates is taken into account thanks to an integro-differential one.

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2009