Effect of T-stress on Edge Dislocation Formation at a Crack Tip under Mode I Loading
نویسندگان
چکیده
We calculate the effect of the nonsingular stress acting parallel to a crack (the “Tstress”) on edge dislocation nucleation at a crack loaded in Mode I. We find that this leads to crack size effect – that is, for small cracks (of order 100 atomic spacings or less), the T stress causes the critical load for dislocation nucleation (expressed in terms of the applied stress intensity factor) to deviate from the classical T = 0 result. Specific results are discussed for the case of a finite crack subject to remote tension, where it is shown that the threshold for dislocation nucleation is reduced.
منابع مشابه
Analysis of Multiple Yoffe-type Moving Cracks in an Orthotropic Half-Plane under Mixed Mode Loading Condition
The present paper deals with the mixed mode fracture analysis of a weakened orthotropic half-plane with multiple cracks propagation. The orthotropic half-plane contains Volterra type glide and climb edge dislocations. It is assumed that the medium is under in-plane loading conditions. The distributed dislocation technique is used to obtain integral equations for the dynamic problem of multiple ...
متن کاملEffect of Crack Geometry on Dislocation Nucleation and Cleavage Thresholds
A continuum model based upon the Peierls-Nabarro description of a dislocation ahead of a crack is used to evaluate the critical mode I loading for dislocation nucleation at the tip of a finite, pre-blunted crack. A similar approach is used to evaluate the critical mode I loading for atomic decohesion. Results are presented for various crack tip root radii (a measure of bluntness), for several c...
متن کاملIn-Plane Analysis of an FGP Plane Weakened by Multiple Moving Cracks
In this paper, the analytical solution of an electric and Volterra edge dislocation in a functionally graded piezoelectric (FGP) medium is obtained by means of complex Fourier transform. The system is subjected to in-plane mechanical and electrical loading. The material properties of the medium vary exponentially with coordinating parallel to the crack. In this study, the rate of the gradual ch...
متن کاملCrack Interaction Studies Using XFEM Technique
In this paper, edge crack problems under mechanical loads have been analysed using extended finite element method (XFEM) as it has proved to be a competent method for handling problems with discontinuities. The XFEM provides a versatile technique to model discontinuities in the solution domain without re-meshing or conformal mesh. The stress intensity factors (SIF) have been calculated by domai...
متن کاملCrack Tip Constraint for Anisotropic Sheet Metal Plate Subjected to Mode-I Fracture
On the ground of manufacturing, sheet metal parts play a key role as they cover about half of the production processes. Sheet metals are commonly obtained from rolling and forming processes which causes misalignment of micro structure resulting obvious anisotropic characteristics and micro cracks. Presence of micro cracks poses serious attention, when stresses at the tip reach to the critical v...
متن کامل