Study on Failure Plane of Bulk Solid in Squat Silos
نویسنده
چکیده
Abstract: With the increasing volume demand of silos, squat silo diameters are bigger and bigger. However, present wall pressure computation methods are mostly based on small diameter silos. To solve this problem, systematical research on the wall pressure in squat silos is of great importance. For now, in the Chinese code the wall pressure computation methods are based on the limit equilibrium theory to be calculated, which define the orientation of the failure plane in the bulk solid within the silo. The rupture angle is a key parameter to silos’ wall pressure. Therefore the value and direction of rupture angle are researched by theoretical method in this paper, which has heavy significance and provide an important basis for the large diameter silo design.
منابع مشابه
Lateral Pressure in Squat Silos under Eccentric Discharge
The influence of eccentric discharge of stored solids in squat silos has been highly valued by many researchers. However, calculation method of lateral pressure under eccentric flowing still needs to be deeply studied. In particular, the lateral pressure distribution on vertical wall could not be accurately recognized mainly because of its asymmetry. In order to build mechanical model of latera...
متن کاملFlow Properties of Powders and Bulk Solids
In order to compare and optimize powders regarding flowability and to design powder handling equipment like silos, feeders, and flow promoting devices, it is necessary to know the mechanical properties – the so-called flow properties. In the present paper it is outlined which physical parameters describe the flow properties of a powder or a bulk solid, and how these parameters are determined ex...
متن کاملEffect of Stress Triaxiality on Yielding of Anisotropic Materials under Plane Stress Condition
The triaxiality of the stress state is known to greatly influence the amount of plastic strain which a material may undergo before ductile failure occurs. It is defined as the ratio of hydrostatic pressure, or mean stress, to the von Mises equivalent stress. This paper discusses the effects of stress triaxiality on yielding behavior of anisotropic materials. Hill-von Mises’s criteria for anisot...
متن کاملFinite Difference Method for Biaxial and Uniaxial Buckling of Rectangular Silver Nanoplates Resting on Elastic Foundations in Thermal Environments Based on Surface Stress and Nonlocal Elasticity Theories
In this article, surface stress and nonlocal effects on the biaxial and uniaxial buckling of rectangular silver nanoplates embedded in elastic media are investigated using finite difference method (FDM). The uniform temperature change is utilized to study thermal effect. The surface energy effects are taken into account using the Gurtin-Murdoch’s theory. Using the principle of virtual work, the...
متن کاملEffect of Material Wet on Silo Obstruction Solution by Impact (TECHNICAL NOTE)
Vertical silos are large cylinders used for material storage in agriculture and mineral industries. One of the silo problems is its obstruction due to dome and dense packing. Depend on the material properties and silo dimensions several techniques are used to solve this problem. In the present work, possibility of obstruction solution of a laboratory silo by ball impact is investigated. Test ma...
متن کامل