Parameter Analysis of Fluid-Solid Coupling for Wet Brake Disc
نویسندگان
چکیده
Due to the poor conditions of wet brake cooling and the high temperature of the working characteristics, this paper intended to introduce the oil film vadose between the brake linings, considered the variation of volume of grooves on the friction plate, and then proposes the three-dimensional transient dynamic response of fluid-solid coupling mathematical model. By parameter analysis of the disc transient thermal stress field distribution on the friction plate, and according to the real dimension of the brake disc, the distribution of the temperature and the stress of the wet brake disc during the braking are analyzed, the variation of temperature field and stress field in friction plate are obtained. The data curves shown the temperature and the stress are coupled. Finally, the results shows that the mathematical model is effective and feasible.
منابع مشابه
Thermo-mechanical high-cycle fatigue analysis of exhaust manifold of turbocharged engine with two-way coupling FSI
NNowadays, car manufactures in order to increasing torque and power with consider to fuel consumption, have swept to production of turbocharged engines. With consider to exhaust gas-temperature rises in boosted engines, recognition of critical locations of exhaust manifold in the worse condition of engine (full load and maximum speed), to prevent fracture of exhaust manifold is very important. ...
متن کاملThermal Convection of Rotating Micropolar Fluid in Hydromagnetics Saturating A Porous Medium
This paper deals with the theoretical investigation of the thermal instability of a thin layer of electrically conducting micropolar rotating fluid, heated from below in the presence of uniform vertical magnetic field in porous medium. A dispersion relation is obtained for a flat fluid layer, contained between two free boundaries using a linear stability analysis theory, and normal mode analysi...
متن کاملNonlinear Vibration Analysis of the Fluid-Filled Single Walled Carbon Nanotube with the Shell Model Based on the Nonlocal Elacticity Theory
Nonlinear vibration of a fluid-filled single walled carbon nanotube (SWCNT) with simply supported ends is investigated in this paper based on Von-Karman’s geometric nonlinearity and the simplified Donnell’s shell theory. The effects of the small scales are considered by using the nonlocal theory and the Galerkin's procedure is used to discretize partial differential equations of the governing i...
متن کاملSimulation of fully coupled thermomechanical analysis of disc brake rotor
Vehicle braking system is considered as one of the most fundamental safety-critical systems in modern vehicles as its main purpose is to stop or decelerate the vehicle. The frictional heat generated during braking application can cause numerous negative effects on the brake assembly such as brake fade, premature wear, thermal cracks and disc thickness variation (DTV). In the past, surface rough...
متن کاملAn optimization study of a multiple-row pin-vented brake disc to promote brake cooling using computational fluid dynamics
Brake disc cooling is an important area of research for high-performance brake disc manufacturers, users as well as academia. In high-demand braking applications, vented discs are increasingly being used as these are considered to have high heat-dissipating characteristics. The cooling efficiency of ventilated brakes depends on three key characteristics: the mass flowrate through the disc, i.e....
متن کامل