Analysis of Nuclear Proliferation Resistance of DUPIC Fuel Cycle
نویسندگان
چکیده
This study compares the proliferation resistance of DUPIC (Direct Use of Spent PWR Fuel in CANDU) fuel cycle with other fuel cycle cases. The other fuel cycles considered in this study are PWR of once-through mode (PWR-OT), PWR of reprocessing mode (PWR-MOX), in which spent PWR fuel is reprocessed and recovered plutonium is used for making MOX (Mixed Oxide), CANDU with once-through mode (CANDU-OT), PWR fuel and CANDU fuel in a oncethrough mode with reactor grid equivalent to DUPIC fuel cycle (PWR-CANDU-OT). This study is focused on intrinsic barriers, especially, radiation field of the diverted material, which could be a significant accessibility barrier, amount of special nuclear material based on 1 GWe-yr that has to be diverted and the quality of the separated fissile material. It is indicated from plutonium analysis of each fuel cycle that the MOX spent fuel is containing the largest plutonium per MTHM but PWR-MOX option based on 1 GWe-yr has the best benefit in total plutonium consumption aspects. The DUPIC option is containing a little higher total plutonium based on 1 GWe-yr than the PWR-MOX case, but the DUPIC option has the lowest fissile plutonium content which could be another measure for proliferation resistance. On the whole, the CANDU-OT option has the largest fissile plutonium as well as total plutonium per GWe-yr, which means negative points in nuclear proliferation resistance aspects. It is indicated from the radiation field analysis that fresh DUPIC fuel could play an important radiation barrier role, more than even CANDU spent fuels. In conclusion, due to those inherent features, the DUPIC fuel cycle could include technical characteristics that comply naturally with the Spent Fuel Standard, at all steps along the DUPIC linkage between PWR and CANDU.
منابع مشابه
Optimization of DUPIC Cycle Environmental
A study of the DUPIC (Direct Use of Spent PWR Fuel In CANDU) cycle was made to analyze cycle performance relative to that of PWR and CANDU fuel cycles in terms of uranium utilization and spent fuel production efficiency. The DUPIC cycle was found to be most efficient in terms of minimizing spent fuel production as well as most efficient (within limits) in terms of maximizing natural uranium uti...
متن کاملTransmutation of Dupic Spent Fuel in the Hyper System
In this paper, the transmutation of TRUs of the DUPIC (Direct Use of Spent PWR Fuel in CANDU) spent fuel has been studied with the HYPER system, which is an LBE-cooled ADS. The DUPIC concept is a synergistic combination of PWRs and CANDUs, in which PWR spent fuels are directly reutilized in CANDU reactors after a very simple re-fabrication process. In the DUPICHYPER fuel cycle, TRUs are recover...
متن کاملThermo-chemical Characteristics of Powder Fabricated by Oxidation of Spent PWR Fuel
Thermochemcial characteristics of powder fabricated using oxidation treatment of spent PWR fuel and SIMFUEL were evaluated for recycling of spent fuel such as DUPIC process. Especially, the influence of spent fuel burn-ups on the powder fabrication characteristics was experimentally evaluated, ranging from 27,300 to 65,000 MWd/tU. Densities of powder manufactured from an oxidation, OREOX and th...
متن کاملSustainability Features of Nuclear Fuel Cycle Options
The nuclear fuel cycle is the series of stages that nuclear fuel materials go through in a cradle to grave framework. The Once Through Cycle (OTC) is the current fuel cycle implemented in the United States; in which an appropriate form of the fuel is irradiated through a nuclear reactor only once before it is disposed of as waste. The discharged fuel contains materials that can be suitable for ...
متن کاملNano- TiO2/Nd Deposited on -Fe2O3 as a Magnetically Separable Photocatalyst
TiO2/Magnetit and TiO2/Nd/Magnetit were prepared and used for photocatalytic decomposition of the methylorange as a pollutant. TiO2 and TiO2/Nd were prepared by sol gel method and were characterized using XRD, FT IR and TEM. The prepared catalysts were deposited on magnetite surface to have a catalyst with magnetite core. So the catalyst can be separated easily from the waste solution by a magn...
متن کامل