Three-dimensional Gradient Index Optics Fabricated in Diffusive Photopolymers
نویسندگان
چکیده
منابع مشابه
Single Mode 3D Diffusive Photopolymer Optics for Optical Integrated Circuits
We demonstrate single mode three-dimensional optics fabricated via direct-write lithography in diffusive photopolymers, including uniform waveguides, symmetrical waveguide tapers, 90 OCIS codes: sharp waveguide bends and waveguides through thin hybrid subcomponents. (130.3120) Integrated optics devices; (230.7370) Waveguides; (140.3450) Laser-induced chemistry.
متن کاملArbitrary GRIN component fabrication in optically driven diffusive photopolymers.
We introduce a maskless lithography tool and optically-initiated diffusive photopolymer that enable arbitrary two-dimensional gradient index (GRIN) polymer lens profiles. The lithography tool uses a pulse-width modulated deformable mirror device (DMD) to control the 8-bit gray-scale intensity pattern on the material. The custom polymer responds with a self-developing refractive index profile th...
متن کاملMolded transparent photopolymers and phase shift optics for fabricating three dimensional nanostructures.
This paper introduces approaches that combine micro/nanomolding, or nanoimprinting, techniques with proximity optical phase mask lithographic methods to form three dimensional (3D) nanostructures in thick, transparent layers of photopolymers. The results demonstrate three strategies of this type, where molded relief structures in these photopolymers represent (i) fine (<1 microm) features that ...
متن کاملMode profile imaging and loss measurement for uniform and tapered single-mode 3D waveguides in diffusive photopolymer.
We demonstrate single-mode uniform and parabolically tapered three-dimensional waveguides fabricated via direct-write lithography in diffusion-based photopolymers. Modulation of the writing power is shown to compensate Beer-Lambert absorption in the single-photon initiator and to provide precise control of modal tapers. A laminated sample preparation is introduced to enable full 3D characteriza...
متن کاملTomographic reconstruction of weak, replicated index structures embedded in a volume.
Measurements of weak, embedded index structures are important for material characterization of photopolymers, glass and other optical materials as well as for characterization of fabricated structures such as waveguides. We demonstrate an optical diffraction tomography system capable of measuring deeply-buried, weak, fabricated index structures written in a homogeneous volume. High-fidelity cro...
متن کامل