The Use of Mechanical Aeration and Its Effects on Water Mass

ثبت نشده
چکیده

Due to the increasing use of artificial aerators in fish ponds, and to the lack of studies on this subject, this work studied some of the aspects associated with their use. The influence of a diffuser type aerator (AR 120) on the biotic and abiotic variables was evaluated in a fish pond. Three points of the pond were marked for the taking of samples: 5, 10 and 23 m from the aerator. Samples were taken every day for 15 consecutive days: 5 days before the use of the aerator, 5 days with the aerator functioning and 5 days with it not functioning. The limnological variables studied did not show significant differences (P > 0.05) when the three sampling points were compared, but regarding the use of the aerator, variables such as water temperature, transparency, pH, dissolved oxygen, bicarbonate, free CO 2 , total phosphorus, orthophosphate, ammonia nitrate and nitrite concentrations showed significant differences (P < 0.05) when the water was mechanically agitated. There were no significant differences (P > 0.05) with the use of the aerator regarding conductivity, alkalinity, total CO 2 and chlorophyll a values. The phytoplanktonic community suffered as a direct influence of the aerator (P < 0.05). The community was dominated by Chlorophyta, representing more than 70% of the total organisms present, followed by Cyanophyta and Chrysophyta which tended to increase in number after the use of the aerator. This probably occurred because these groups adapt quickly to changes in the environment.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

بهینه سازی فرایند تصفیه فاضلاب صنایع شیر و لبنیات به روش SBR با استفاده از کمک منعقد کننده آهک با تاکید بر کاهش زمان هوادهی

ABSTRACT Background and objective: Milk and dairy industries wastewater are considered the most polluted effluents, and if discharged without treatment into the environment, can cause serious environmental problems. &nbsp;In this study, effects of aeration time and lime coagulant on SBR efficiency were investigated. Materials and Method: Two Parallel reactors with a volume of &nbsp;20 L w...

متن کامل

Surfactant effects on alpha factors in full-scale wastewater aeration systems.

Aeration is an essential process in the majority of wastewater treatment processes, and accounts for the largest fraction of plant energy costs. Aeration systems can achieve wastewater oxygenation by shearing the surface (surface aerators) or releasing bubbles at the bottom of the tank (coarse- or fine-bubble aerators). Surfactants accumulate on gas-liquid interfaces and reduce mass transfer ra...

متن کامل

Aeration and air–water mass transfer on stepped chutes with embankment dam slopes

Stepped spillwayflows are characterised by significant free-surface aeration downstream of the inception point of air entrainment. The stepped design is advantageous for applications which require large energy dissipation and strong flow aeration. While the energy dissipation rate for embankment stepped spillways was studied previously, the optimum design for aeration and air–water mass transfe...

متن کامل

Effect of Outlet Submergence in Bottom Outlet on Aeration between Emergency and Service Gates at high Dams

Using bottom outlets for drain and regulation of water level in reservior has significant importance in performance mahagment of dam. Amount of service and emergency gates opening have important role in pressure, velocity and discharge coefficient variations and finally dam performance. In the present research, flow aeration between emergency and service gates was studied with different hydraul...

متن کامل

The Effect of Geometrical Characteristics of Desiccant Wheel on its Performance

Desiccant wheels are widely used in buildings to control humidity and reduce energy consumption. A model is presented based on transient coupled heat and mass transfer, to model, design and analyze the effects of geometrical characteristics of a honeycombed rotary desiccant wheel and its performance. Governing equations are solved numerically using finite volume method and the model is validate...

متن کامل

Effects of the rectangular groove dimensions on the thermal features of the turbulent Al2O3-water nanofluid flow in the grooved tubes

 The forced convection heat transfer of turbulent Al2O3-water nanofluid flow inside the grooved tubeswith the different aspect ratio of the rectangular grooves is numerically investigated. The governingequations have been solved using finite volume method (FVM) coupled with SIMPLE algorithm. It isassumed the heat flux is constant on the grooved walls. The Single-phase approach is applied for th...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2001