A nonconjugated bridge in dimer-sensitized solar cells retards charge recombination without decreasing charge injection efficiency.
نویسندگان
چکیده
Dye sensitized solar cells (DSSCs) employing a dimer porphyrin, which was synthesised with two porphyrin units connected without conjugation, have shown that both porphyrin components can contribute to photocurrent generation, that is, more than 50 % internal quantum efficiency. In addition, the open-circuit voltage (Voc) of the DSSCs was higher than that of DSSCs using monomer porphyrins. In this paper, we first optimized cell structure and fabrication conditions. We obtained more than 80% incident photon to current conversion efficiency from the dimer porphyrin sensitized DSSCs and higher Voc and energy conversion efficiency than monomer porphyrin sensitized solar cells. To examine the origin of the higher Voc, we measured electron lifetime in the DSSCs with various conditions, and found that the dimer system increased the electron lifetime by improving the steric blocking effect of the dye layer, whilst the lack of a conjugated linker prevents an increase in the attractive force between conjugated sensitizers and the acceptor species in the electrolyte. The results support a hypothesis; dispersion force is one of the factors influencing the electron lifetime in DSSCs.
منابع مشابه
Restricted charge recombination process in PbS quantum dot sensitized solar cells by different coating cycles of ZnS films
The relatively low power conversion efficiency (PCE) of quantum dot sensitized solar cells (QDSSCs) is attributed to charge recombination at the interfaces. Charge recombination process could be suppressed by coating the QD layer with a wide band gap semiconductor such as ZnS, which acts as a blocking layer between the QDs and hole transport material (HTM). In present study, to improve PCE of P...
متن کاملFabrication of Novel High Potential Chromium-Doped TiO2 Nanoparticulate Electrode-based Dye-Sensitized Solar Cell (DSSC)
In the current study, pure TiO2 and Cr-doped TiO2 (Cr@TiO2) nanoparticles were synthesized via sol-gel method and the resulting materials were applied to prepare the porous TiO2 electrodes for dye-sensitized solar cells (DSSCs). It is hypothesized that the advantages of the doping of the metal ions into TiO2 lattice are the temporary rapping of the photogenerated electron-hole (charge carriers)...
متن کاملApplication of azo dye as sensitizer in dye-sensitized solar cells
An azo dye used as photosensitizers in Dye-sensitized solar cells DSSCs. Azo dyes economically superior to organometallic dyes because they are color variation and cheap. The spectrophotometric evaluation of an azo dye in solution and on a TiO2 substrate show that the dye form J-aggregation on the nanostructured TiO2 substrate. Oxidation potential measurements for used azo dyes ensured an energ...
متن کاملDecatungstate acid improves the photo-induced electron lifetime and retards the recombination in dye sensitized solar cells.
Decatungstate acid (DA) was utilized to modify TiO2 in the photoanode of dye sensitized solar cells. The photo-induced electron lifetime was evidently improved and the recombination was greatly inhibited. DA can introduce levels of impurities and lower the Fermi level through a doping effect and thus increase the photocurrent. Moreover, the improved charge carrier density can be found through e...
متن کاملHighly efficient photocathodes for dye-sensitized tandem solar cells.
Thin-film dye-sensitized solar cells (DSCs) based on mesoporous semiconductor electrodes are low-cost alternatives to conventional silicon devices. High-efficiency DSCs typically operate as photoanodes (n-DSCs), where photocurrents result from dye-sensitized electron injection into n-type semiconductors. Dye-sensitized photocathodes (p-DSCs) operate in an inverse mode, where dye-excitation is f...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- ACS applied materials & interfaces
دوره 5 21 شماره
صفحات -
تاریخ انتشار 2013