Laser Induced Damage Studies on Al2O3, SiO2, and MgF2 Thin Films for Anti-Reflection Coating Application in High Power Laser Diode
نویسندگان
چکیده
The laser diode facet damage is one of the impeding factors of the high-power laser diode operation. To overcome this restriction laser diode facet coating can be utilized. During the high power operation of the laser diode, it is observed that the single layer anti reflection (AR) coating at the front facet shows optical damage while the multilayer high reflective coating at the back facet remains undamaged. To determine the “damage threshold” of the materials used for AR coating, an e-beam evaporated Al2O3, MgF2, and SiO2 single layer thin films on GaAs substrate have been optimized for the wavelength ~ 1060 nm. The diode pumped Q-switched Neodymium Yttrium Aluminum Garnet (Nd:YAG) laser (1064 nm) was used to damage the samples. The damage on the sample was observed under the microscope. The effective damage radius on the samples was 150 m and average continuous wave laser induced damage threshold was found 10 W.
منابع مشابه
Laser-induced damage thresholds of bulk and coating optical materials at 1030 nm, 500 fs.
We report on extensive femtosecond laser damage threshold measurements of optical materials in both bulk and thin-film form. This study, which is based on published and new data, involved simple oxide and fluoride films, composite films made from a mixture of two dielectric materials, metallic films, and the surfaces of various bulk materials: oxides, fluorides, semiconductors, and ionic crysta...
متن کاملPreliminary Results of Treating Cancerous Cells of Lung (QU-DB) by Hyperthermia using Diode Laser and Gold Coated Fe3O4/SiO2 Nano-Shells: An in-Vitro Assay
Introduction In this study, we describe the results of controlled synthesis and application of gold coated Fe3O4/SiO2 nano-shells combined with the optical property of gold for enhancement of selective photothermal interaction with cancerous cells based on the surface plasmon resonance (SPR) Phenomena. Materials and Methods Magnetite Nano-Particles (MNPs) were prepared by means of co-precipitat...
متن کاملFabrication of MgF2-SiO2 Nanocomposite Thin Films and Investigation of Their Optical and Hydrophobic Properties
In this research, MgF2-2%SiO2/MgF2 thin films were applied on a glass substrate. At first, MgF2 thin films with the optical thickness were deposited on the glass slide substrates. Then, MgF2-2%SiO2 thin films were deposited on the glass coated with MgF2 thin films. Finally, the nanocomposite thin films were surface treated by the PFTS solution. Characterization of the thin film was done by X-Ra...
متن کاملAtomic layer deposition for fabrication of HfO2/Al2O3 thin films with high laser-induced damage thresholds
Previous research on the laser damage resistance of thin films deposited by atomic layer deposition (ALD) is rare. In this work, the ALD process for thin film generation was investigated using different process parameters such as various precursor types and pulse duration. The laser-induced damage threshold (LIDT) was measured as a key property for thin films used as laser system components. Re...
متن کاملNew Sol-Gel Solution with 45 Days Stability for Preparation Silica Thin Films
As we know sol-gel is one of the most important techniques for thin film preparation. In this paper, high transmission silica thin films have been prepared by dip-coating process from a new silicon-alkoxide solution. The prepared sol was stable for 45 days which is very important to characterize the coating process. The optical properties as a function of aging time, withdrawal rate, and he...
متن کامل