Remote Sensing of Deformation of a High Concrete-Faced Rockfill Dam Using InSAR: A Study of the Shuibuya Dam, China

نویسندگان

  • Wei Zhou
  • Shaolin Li
  • Zhiwei Zhou
  • Xiaolin Chang
چکیده

Settlement is one of the most important deformation characteristics of high concrete faced rockfill dams (CFRDs, >100 m). High CFRDs safety would pose a great threat to the security of people’s lives and property downstream if this kind of deformation were not to be measured correctly, as traditional monitoring approaches have limitations in terms of durability, coverage, and efficiency. It has become urgent to develop new monitoring techniques to complement or replace traditional monitoring approaches for monitoring the safety and operation status of high CFRDs. This study examines the Shuibuya Dam (up to 233.5 m in height) in China, which is currently the highest CFRD in the world. We used space-borne Interferometric Synthetic Aperture Radar (InSAR) time series to monitor the surface deformation of the Shuibuya Dam. Twenty-one ALOS PALSAR images that span the period from 28 February 2007 to 11 March 2011 were used to map the spatial and temporal deformation of the dam. A high correlation of 0.93 between the InSAR and the in-situ monitoring results confirmed the reliability of the InSAR method; the deformation history derived from InSAR is also consistent with the in-situ settlement monitoring system. In addition, the InSAR results allow continuous investigation of dam deformation over a wide area that includes the entire dam surface as well as the surrounding area, offering a clear picture continuously of the dam deformation.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

InSAR Observation and Numerical Modeling of the Earth-Dam Displacement of Shuibuya Dam (China)

How to accurately determine the mechanical parameters of rockfill is one of the key issues of concrete-face rockfill dams. Parameter back-analysis using internal or external monitoring data has been proven to be an efficient way to solve this problem. However, traditional internal or external monitoring methods have limitations in efficiency and long-term monitoring. In this paper, the displace...

متن کامل

A Dynamic Analysis of the Interaction of Concrete Face and Rockfill Part in Concrete Faced Rockfill Dams

Introduction Concrete faced rockfill dams have been considered in recent years more than other types of dams due to their low dependency on the bed and the shape of the valley, as well as the simpler construction technology. In this regard, rockfill dams are a suitable substitute for embankment dams because of higher stability of the body and the availability of rock aggregates. On the other h...

متن کامل

Non-linear Analysis of Stress and Strain of Concrete-faced Rockfill Dam for Sequential Impoundment Process

The rockfill is modeled as nonlinear elastic material, whose stress-dependent tangent modulus is related to the confining pressure. The parameters of constitutive relationship of stress and strain are determined by tri-dimensional compression test in laboratory. The model applied in this study adopts the technique of element birth and death to simulate the sequential impoundment process of conc...

متن کامل

Seismic Response of the Kavar Concrete Face Rockfill Dam (RESEARCH NOTE)

This study deals with the dynamic behavior of the kavar concrete Abstract face rockfill damwhich is the first dam of this type to be const ructed in a highly active seismic prone area,situated in the state of Fars southern part of the Islamic Republic of Iran. The finite elementmethod was used as a tool to carry out this study. The finite element discretization was carriedout under plane strain...

متن کامل

Computer Simulation of Sequential Impoundment Process of Concrete-faced Rockfill Dam

A procedure is presented for simulating the sequential impoundment process of concrete-faced rockfill dam using nonlinear finite element method. The parameters of constitutive relationship of stress and strain are determined by tri-dimensional compression test in laboratory. The model applied in this study adopts the technique of element birth and death to simulate the sequential impoundment pr...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Remote Sensing

دوره 8  شماره 

صفحات  -

تاریخ انتشار 2016