Scramjet Nozzles

نویسنده

  • T Cain
چکیده

The lecture is given in four parts, each being a step in the process of nozzle design, and within each part the methods and techniques preferred by the lecturer are presented. We begin with a reminder concerning control volumes and the separation of aerodynamic and propulsive forces and moments. Then it is demonstrated how an appropriate control volume can help define the propulsive force vector that maximises cruise efficiency. The third part recounts Rao's method for maximising thrust when nozzle length is restricted and the final part introduces a new, simpler, Method of Characteristics (MOC) for non-equilibrium flows.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

3d Computation of Single-expansion-ramp and Scramjet Nozzles

Description of the computations for three-dimensional nonaxisymmetric nozzles and analysis of the flowfields are presented in this paper. Two different types of nozzles are investigated for con~pressible flows at high Reynolds numbers. These are the single-expansionramp and scramjet nozzles. The computation for the single-expansion-ramp nozzle focuses on the condition of low pressure ratio, whi...

متن کامل

Scramjet Combustor Development.pdf

An airframe integrated scramjet propelled vehicle has advantages for application to several missions. In its simplest form, such a vehicle will combine the features of quick reaction, low vulnerability to counter attack and better propulsion efficiency. The Supersonic Combustion Ramjet (SCRAMJET) engine has been recognized as the most promising air breathing propulsion system for the hypersonic...

متن کامل

Investigations on the Influence of the In-Stream Pylon and Strut on the Performance of a Scramjet Combustor

The influence of the in-stream pylon and strut on the performance of scramjet combustor was experimentally and numerically investigated. The experiments were conducted with a direct-connect supersonic model combustor equipped with multiple cavities. The entrance parameter of combustor corresponds to scramjet flight Mach number 4.0 with a total temperature of 947 K. The research results show tha...

متن کامل

Simultaneous measurements of multiple flow parameters for scramjet characterization using tunable diode-laser sensors.

This paper reports the simultaneous measurements of multiple flow parameters in a scramjet facility operating at a nominal Mach number of 2.5 using a sensing system based on tunable diode-laser absorption spectroscopy (TDLAS). The TDLAS system measures velocity, temperature, and water vapor partial pressure at three different locations of the scramjet: the inlet, the combustion region near the ...

متن کامل

Trajectory Analysis for the Hy-v Scramjet Flight Experiment and the Effects of a Recovery System

With the retirement of the space shuttle near and rising fuel prices driving a demand for more efficient travel, alternative engine technology is being heavily researched. The scramjet, or supersonic combustion ramjet, has proven to be a promising development in reusable hypersonic transportation. Flight testing these engines, however, is very expensive and no scramjet flight has yet been recov...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2011