Microwave-Assisted Synthesis of Goethite Nanoparticles Used for Removal of Cr(VI) from Aqueous Solution
نویسندگان
چکیده
The microwave-assisted synthesis of goethite nanoparticles has been studied. The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), differential thermal analysis (DTA) and Brunauer-Emmett-Teller (BET) method. Goethite rod-like nanoparticles have been successfully synthesized in 10 min of microwave treating at 100 °C. Particle size is in the range from 30 to 60 nm in width and from 200 to 350 nm in length. BET analysis indicated that the surface area of the product is 158.31 m²g-1. The feasibility of Cr(VI) removal fromaqueous solution depends on the pH of the solution and contact time. The maximum adsorptionis reached at pH 4.0 and 540 min of contact time. The adsorption kinetics was analyzedby the pseudo-first- and second-order models and the results reveal that the adsorption process obeys the pseudo-second-order model. The adsorption data were fitted well with the Langmuir adsorption isotherm.
منابع مشابه
Use of Sawdust of Aspen Tree for the Removal of Chromium (VI) from Aqueous Solution
Adsorption capacity of Cr (VI) onto sawdust of aspen tree and activated sawdust, was investigated in a batch system by considering the effects of various parameters like contact time, initial concentration, pH , temperature, agitation speed, absorbent dose and particle size. Cr (VI) removal is pH dependent and caused to be maximum at pH 2.0. The amounts of Cr(VI) adsorbed increased with increas...
متن کاملRemoval of chromium (VI) from aqueous solution by adsorption using cousinia eryngioides boiss and activated carbon
Adsorption capacity of Cr (VI) onto cousinia eryngioides boiss, activated carbon was investigated in a batch system by considering the effects of various parameters like contact time, initial concentration, pH, temperature, agitation speed, absorbent dose and particle size. Cr (VI) removal is pH dependent and found to be maximum at pH 2.0. The amounts of Cr (VI) adsorbed increased with increase...
متن کاملSimultaneous Adsorption and Degradation of Cr(VI) and Cd(II) Ions from Aqueous Solution by Silica-Coated Fe0 Nanoparticles
Core-shell silica-coated Fe(0) nanoparticles (Fe@SiO2) were prepared in one-step synthesis by aqueous reduction combined with modified Stöber method. The as-prepared Fe@SiO2 were then used for simultaneous removal of Cr(VI) and Cd(II) from aqueous solution. Batch tests indicated that Fe@SiO2 exhibited high removal capacity toward Cr(VI) and Cd(II). Cr(VI) was removed by Fe@SiO2 through reductio...
متن کاملArtificial neural networks approach for modeling of Cr(VI) adsorption from aqueous solution by MR, MAC, MS
The adsorption ability of Dowex Optipore L493 resin modified with Aliquat 336 (MR), activated carbon modified with Aliquat 336 (MAC) and sawdust modified with Aliquat 336 (MS) for removal of Cr(VI) from aqueous solution in batch system was investigated. The effects of operational parameters such as adsorbent dosage, initial concentration of Cr(VI) ions, pH, temperature and contact time were stu...
متن کاملHexavalent Chromium Removal from Aqueous Solutions by Adsorption onto Synthetic Nano Size ZeroValent Iron (nZVI)
The present work was conducted for the synthesis of nano size zerovalent iron (nZVI) and hexavalent chromium (Cr(VI)) removal as a highly toxic pollutant by using this nanoparticles. Batch experiments were performed to investigate the effects of Cr(VI), nZVI concentration, pH of solution and contact time variation on the removal efficiency of Cr(VI). nZVI was synthesized by reduction of ferric ...
متن کامل