Viability of sub-0.4-nm diameter carbon nanotubes
نویسندگان
چکیده
Hartree-Fock ~HF! and density functional theory calculations indicate that a ~4,0! carbon nanotube ~CNT! of sub-0.4-nm diameter is stable and its heat of formation is close to that of the stable C36 (D6h). Semiempirical molecular-orbital calculation shows that such narrow tubular structure is more stable than the corresponding opened fragment in the innermost zone of a large CNT. Simulated TEM images show that an extra-narrow CNT does not show the typical CNT image regardless of the microscopic resolution. In order to aid experimental identification, the Raman spectrum of the ~4,0! CNT obtained from HF calculation shows A1g breathing modes in 489–725 cm.
منابع مشابه
Evaluation of catalyst ball-milling process on growth and diameter of carbon nanotubes on iron nanoparticles
In this study, we describe the growth of carbon nanotubes on commercial iron nanoparticles without carbon shell (Fe (nm), size 2O3 and Fe* (nm)/MgO) was carried out by mixing commercial Fe* nanoparticles (as catalyst) with Al2O3 and MgO powders (as supports)by using ball-milling method. The results show in spite of the fact that ball-milling process can have neg...
متن کاملEvaluation of catalyst ball-milling process on growth and diameter of carbon nanotubes on iron nanoparticles
In this study, we describe the growth of carbon nanotubes on commercial iron nanoparticles without carbon shell (Fe (nm), size 2O3 and Fe* (nm)/MgO) was carried out by mixing commercial Fe* nanoparticles (as catalyst) with Al2O3 and MgO powders (as supports)by using ball-milling method. The results show in spite of the fact that ball-milling process can have neg...
متن کاملSynthesis and purification of Carbon nanotubes
In this study, multi wall carbon nanotubes (MWCNTs) were synthesized by Chemical vapor deposition (CVD) method using two different catalysts (Fe nanoparticles) and (Ni nanoparticles) with two different substrates: Quartz and Alumina. Acetylene gas was used as a carbon source and Argon as a carrier gas at different temperatures and different times to study the effects of these parameters on CNT...
متن کاملSynthesis and purification of Carbon nanotubes
In this study, multi wall carbon nanotubes (MWCNTs) were synthesized by Chemical vapor deposition (CVD) method using two different catalysts (Fe nanoparticles) and (Ni nanoparticles) with two different substrates: Quartz and Alumina. Acetylene gas was used as a carbon source and Argon as a carrier gas at different temperatures and different times to study the effects of these parameters on CNT...
متن کاملReduction of single-walled carbon nanotube diameter to sub-nm via feedstock
Vertically aligned single-walled carbon nanotube arrays were synthesized from dip-coated binary Co/Mo catalyst by no-flow chemical vapor deposition from either pure ethanol or acetonitrile as carbon feedstock. By changing to acetonitrile the mean diameter was reduced from 2.1 nm to less than 1.0 nm despite using identically prepared catalyst. The demonstrated diameter control on flat substrates...
متن کامل