Static and Dynamic Response of a Novel Anisotropic Composite Foam Concept for Protective Helmets
نویسندگان
چکیده
In this paper, a new anisotropic material concept namely composite foam is proposed as an alternative to next generation helmet liners which can potentially reduce head rotational accelerations. The Layered Composite foam concept comprises of foam layers with different densities which are glued to each other in a parallel or series configuration. Initial experiments such as static combined shearcompression and linear impact tests have been performed. The performance of composite foams has been compared with a commercial expanded polystyrene bead foam (EPS), with nominal density of 80 kg/m, which is currently the most used material for bicycle helmets. In this study the two types of composite foam with parallel and series configuration have been produced. Combined shear compression results indicate the parallel configuration is more suitable in terms of shear-compressive properties as well as energy absorption. Moreover, linear impact results indicate that the composite foam concept can mitigate peak forces compared to a standard EPS foam.
منابع مشابه
The Effect of Fe Additive on Plastic Deformation for Crush-Boxes with Closed-Cell Metal Foams, Part II: Al-Composite Foam-Filled brass tubes Compression Response
The brass tubes with foam cores of AlSi7SiC3, AlSi7SiC3Fe1 and AlSi7SiC3Fe3 were produced as the crush-boxes with circle and square cross-section. Then axial compressive behavior and energy absorption capability of the foam-filled tubes were investigated during the quasi-static progressive plastic buckling. The uniaxial compressive stress–strain curves of the foam-filled brass tubes exhibited t...
متن کاملParametric Study of the Empty and Foam-Filled End-Capped Conical Tubes under quasi Static and Dynamic impact Loads
This paper investigates the parametric study of the empty and foam-filled end-capped tubes under quasi static and dynamic loadings. The numerical crash analysis of the empty and foam-filled tubes was performed using the explicit finite element code ABAQUS- explicit. Satisfactory agreements were generally achieved between the numerical and experimental results. In order to determine the crash be...
متن کاملForce protection using composite sandwich structures
In the recent past, advances have been made in the attempt to utilize composite materials as components in protective structures such as those employed by the Air Force to secure critical military assets. In such applications, where lightweight materials that exhibit large levels of energy absorption and high strength/stiffness characteristics are desirable, composite sandwich constructions off...
متن کاملDynamic stress concentration in a hybrid composite laminate subjected to a sudden internal break
In this work, transient dynamic stress concentration in a hybrid composite laminate subjected to a sudden internal crack is examined. It is assumed that all fibers lie in one direction and the applied load acts along direction of fibers. Two types arrangements are considered for the fiber; square and hexagonal arrangement. Using shear lag model, equilibrium equations are deduced and upon proper...
متن کاملEffect of Fe additive on plastic deformation for crush-boxes with closed-cell metal foams, Part I: Al-composite foam compression response
AbstractIn this paper, we investigate effect of Fe–intermetallic compounds on plastic deformation of closed-cell composite Aluminum Foam as filler of thin-walled tubes. However, deformation of the Aluminum foam-filled thin-walled tubes as crushed-box will be presented in Part (II). Composite foams of AlSi7SiC3 and AlSi7SiC3-(Fe) as closed cell were synthesized by powder metallurgy foaming metho...
متن کامل