Athermal silicon ring resonators clad with titanium dioxide for 1.3µm wavelength operation.
نویسندگان
چکیده
We investigate the athermal characteristics of silicon waveguides clad with TiO(2) designed for 1.3 µm wavelength operation. Using CMOS-compatible fabrication processes, we realize and experimentally demonstrate silicon photonic ring resonators with resonant wavelengths that vary by less than 6 pm/°C at 1.3 µm. The measured ring resonance wavelengths across the 20-50°C temperature range show nearly complete cancellation of the first-order thermo-optical effects and exhibit second-order thermo-optical effects expected from the combination of TiO(2) and Si.
منابع مشابه
CMOS-compatible, athermal silicon ring modulators clad with titanium dioxide.
We present the design, fabrication and characterization of athermal nano-photonic silicon ring modulators. The athermalization method employs compensation of the silicon core thermo-optic contribution with that from the amorphous titanium dioxide (a-TiO(2)) overcladding with a negative thermo-optic coefficient. We developed a new CMOS-compatible fabrication process involving low temperature RF ...
متن کاملAthermal silicon microring resonators with titanium oxide cladding.
We describe a novel approach for CMOS-compatible passively temperature insensitive silicon based optical devices using titanium oxide cladding which has a negative thermo-optic (TO) effect. We engineer the mode confinement in Si and TiO2 such that positive TO of Si is exactly cancelled out by negative TO of TiO2. We demonstrate robust operation of the resulting device over 35 degrees.
متن کاملAthermal Silicon-on-insulator ring resonators by overlaying a polymer cladding on narrowed waveguides.
Athermal silicon ring resonators are experimentally demonstrated by overlaying a polymer cladding on narrowed silicon wires. The ideal width to achieve athermal condition for the TE mode of 220 nm-height SOI waveguides is found to be around 350 nm. After overlaying a polymer layer, the wavelength temperature dependence of the silicon ring resonator is reduced to less than 5 pm/degrees C, almost...
متن کاملNovel Design for Photonic Crystal Ring Resonators Based Optical Channel Drop Filter
Photonic crystal ring resonators (PCRRs) are traditional structures fordesigning optical channel drop filters. In this paper, Photonic crystal channel drop filter(CDFs) with a new configuration of ring resonator is presented. The structure is made ofa square lattice of silicon rods with the refractive index nsi=3. 4 which are perforated inair with refractive index nair=1. Calculations of band s...
متن کاملTowards athermal optically-interconnected computing system using slotted silicon microring resonators and RF-photonic comb generation
We report that completely athermal design of a slotted silicon waveguide is possible by combining the negative thermo-optic (TO) coefficient of, for example, polymethyl methacrylate (PMMA) with the positive TO coefficient of silicon. When used in a microring resonator structure, the filled overcladding slotted waveguide and the unfilled (air-filled) overcladding slotted waveguide can both achie...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Optics express
دوره 23 20 شماره
صفحات -
تاریخ انتشار 2015