Application of Multiple-Valued Switch-Level Algebra to the Design and Analysis of Pass-Transistor Switch Networks
نویسندگان
چکیده
Pass-transistor switch networks have many advantages over gate-level networks, incZuding high density, high speed and low power dissipation. However, their design and analysis lack rigorous mathematicaZ tools. This paper studies the appZication of the multiple-vaZued switch-ZeveZ algebra introduced in 131 to the design and analysis of passtransistor networks. After briefly introducing this multiple-vaZued switch-level algebra, this paper discusses the design and anaZysis procedures in detaiZ. As well, some design and anaZysis examples are given.
منابع مشابه
Design of Arrayed Waveguide Grating based Optical Switch for High Speed Optical Networks
This paper demonstrates the design of an Arrayed Waveguide Gratings (AWG) based optical switch. In the design both physical and network layer analysis is performed. The physical layer power and noise analysis is done to obtain Bit Error Rate (BER). This has been found that at the higher bit rates, BER is not affected with number of buffer modules. Network layer analysis is done to obtain perfor...
متن کاملOn the Use of Multiple-Valued Switch-Level Algebra to Analyze Binary MOS Bridge Circuits and Dynamic Circuits
This paper presents two new results for multiplevalued switch-level algebra (MSA for short). The first is the use of MSA to descaibe the bidirectional switching function of MOS transistors and, thereby, to analyze binary MOS bridge Circuits. The second is the use of MSA to describe the function of capacitors and, thereby, to analyze binary MOS dynamic circuits. The results presented in this pap...
متن کاملDesign and simulation of a RF MEMS shunt capacitive switch with low actuation voltage, low loss and high isolation
According to contact type, RF MEMS switches are generally classified into two categories: Capacitive switches and Metal-to-Metal ones. The capacitive switches are capable to tolerate a higher frequency range and more power than M-to-M switches. This paper presents a cantilever shunt capacitive RF MEMS switch with characteristics such as low trigger voltage, high capacitive ratio, short switchin...
متن کاملAnalysis and Design of a New Single Switch Non-Isolated Buck-Boost dc-dc Converter
In this paper, a new transformerless buck-boost converter based on ZETA converter is introduced. The proposed converter has the ZETA converter advantages such as, buck-boost capability and input to output DC insulation. The suggested converter voltage gain is higher than the classic ZETA converter. In the presented converter, only one main switch is utilized. The proposed converter offers low v...
متن کاملA Class E Power Amplifier with Low Voltage Stress
A new output structure for class E power amplifier (PA) is proposed in this paper. A series LC resonator circuit, tuned near the second harmonic of the operating frequency is added to the output circuit. This resonator causes low impedance at the second harmonic. The output circuit is designed to shape the switch voltage of the class E amplifier and lower the voltage stress of the transistor. T...
متن کامل