Piece Mold, Lost Wax & Composite Casting Techniques of the Chinese Bronze Age
نویسندگان
چکیده
Approximate timeline
منابع مشابه
1 Fabrication of 3 D Mili - Scale Channels for Hemodynamic Studies
3D mili-scale channel representing simplified anatomical models of blood vessels were constructed in polidimethylsiloxane (PDMS). The objective was to obtain a sequential method to fabricate transparent PDMS models from a mold produced by rapid prototyping. For this purpose, two types of casting methods were compared, a known lost-wax casting method and a casting method using sucrose. The chann...
متن کاملStructural and compositional analysis of a casting mold sherd from ancient China
Casting had symbolic significance and was strictly controlled in the Shang dynasty of ancient China. Vessel casting was mainly distributed around the Shang capital, Yin Ruins, which indicates a rigorous centralization of authority. Thus, for a casting mold to be excavated far from the capital region is rare. In addition to some bronze vessel molds excavated at the Buyao Village site, another ke...
متن کاملCopper Alloys in Investment Casting Technology
S. Rzadkosz, J. Zych, A. Garbacz-Klempka, J. Kozana, M. Piękoś, J. Kolczyk, Ł. Jamrozowicz, AGH University of Science and Technology, Faculty of Foundry Engineering, Krakow, Poland M. Kranc, Foundry Research Institute, Krakow, Poland T. Stolarczyk, Copper Museum in Legnica, Poland This paper presents research results in the field of casting technology of copper and copper alloys using the inves...
متن کاملOptimization of Dimensional Deviations in Wax Patterns for Investment Casting
Investment casting is a versatile manufacturing process to produce high quality parts with high dimensional accuracy. The process begins with the manufacture of wax patterns. The dimensional accuracy of the model affects the quality of the finished part. The present study investigated the control and optimization of dimensional deviations in wax patterns. A mold for an H-shaped wax pattern was ...
متن کاملMOLD FILLING BEHAVIOR OF DOUBLE GATING SYSTEM IN ALUMINUMLFC PROCESS
The mold-filling behavior in the casting of aluminum alloy (A413) using lost foam casting (LFC) was explored. The effects of gate numbers, type of gating and casting thickness on the filling behavior were evaluated. Although, unlike convectional casting process, the gating system showed little effect onfilling ability, casting thickness created a greater effect on the mold filling. In contrast ...
متن کامل