Signaling Requirements for Point-to-Multipoint Traffic-Engineered MPLS Label Switched Paths (LSPs)
نویسنده
چکیده
Status of This Memo This memo provides information for the Internet community. It does not specify an Internet standard of any kind. Distribution of this memo is unlimited. Abstract This document presents a set of requirements for the establishment and maintenance of Point-to-Multipoint (P2MP) Traffic-Engineered (TE) Multiprotocol Label Switching (MPLS) Label Switched Paths (LSPs). There is no intent to specify solution-specific details or application-specific requirements in this document. The requirements presented in this document not only apply to packet-switched networks under the control of MPLS protocols, but also encompass the requirements of Layer Two Switching (L2SC), Time Division Multiplexing (TDM), lambda, and port switching networks managed by Generalized MPLS (GMPLS) protocols. Protocol solutions developed to meet the requirements set out in this document must attempt to be equally applicable to MPLS and GMPLS.
منابع مشابه
Requirements for Point to Multipoint Traffic Engineered MPLS LSPs <draft-ietf-mpls-p2mp-requirement-03.txt>
This document presents a set of requirements for Point-to-Multipoint(P2MP) Traffic Engineered (TE) Multiprotocol Label Switching (MPLS) Label Switched Paths (LSPs). It specifies functional requirements for solutions in order to deliver P2MP applications over a MPLS TE infrastructure. It is intended that solutions that specify procedures for P2MP TE LSP setup satisfy these requirements. Yasukawa...
متن کاملNetwork Working Group S. Yasukawa Request for Comments: 4687 Ntt Corporation Category: Informational A. Farrel Old Dog Consulting Operations and Management (oam) Requirements for Point-to-multipoint Mpls Networks
Status of This Memo This memo provides information for the Internet community. It does not specify an Internet standard of any kind. Distribution of this memo is unlimited. Abstract Multi-Protocol Label Switching (MPLS) has been extended to encompass point-to-multipoint (P2MP) Label Switched Paths (LSPs). As with point-to-point MPLS LSPs, the requirement to detect, handle, and diagnose control ...
متن کاملRFC 4687 OAM Reqs for Point - to - Multipoint MPLS
Status of This Memo This memo provides information for the Internet community. It does not specify an Internet standard of any kind. Distribution of this memo is unlimited. Abstract Multi-Protocol Label Switching (MPLS) has been extended to encompass point-to-multipoint (P2MP) Label Switched Paths (LSPs). As with point-to-point MPLS LSPs, the requirement to detect, handle, and diagnose control ...
متن کاملApplicability of the Path Computation Element (PCE) to Point-to-Multipoint (P2MP) MPLS and GMPLS Traffic Engineering (TE)
The Path Computation Element (PCE) provides path computation functions in support of traffic engineering in Multiprotocol Label Switching (MPLS) and Generalized MPLS (GMPLS) networks. Extensions to the MPLS and GMPLS signaling and routing protocols have been made in support of point-to-multipoint (P2MP) Traffic Engineered (TE) Label Switched Paths (LSPs). This document examines the applicabilit...
متن کاملLabel Space Reduction in Multipoint-to-point LSPs for Traffic Engineering
Many ISPs use MPLS for traffic engineering to properly account for and utilize their resources. A fundamental problem in MPLS is to reduce the label space usage by label switched paths (LSPs), while meeting the requirements of the flows. While routing mechanisms have been proposed in context of minimizing point-to-point LSPs, the problem has not gained sufficient attention in context of multipo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- RFC
دوره 4461 شماره
صفحات -
تاریخ انتشار 2006