Vibration Monitoring of Composite Laminates with Delamination Damage
نویسندگان
چکیده
منابع مشابه
Interaction of laminate damage and adhesive disbonding in composite scarf joints subjected to combined in-plane loading and impact
Impact tests were carried out on composite laminates and composite scarf repairs, while both were subjected to in-plane loading with tensile pre-strain levels up to 5000 microstrain. The results show that pre-straining of the composite laminates has no noticeable influence on the size of the delamination area for the given impact energy of 8 J, which represents a typical barely-visible impact o...
متن کاملCompressive Behavior of a Glass/Epoxy Composite Laminates with Single Delamination
The buckling and postbuckling behaviors of a composite beam with single delamination are investigated. A three-dimensional finite element model using the commercial code ANSYS is employed for this purpose. The finite elements analyses have been performed using a linear buckling model based on the solution of the eigenvalues problem, and a non-linear one based on an incremental-iterative method....
متن کاملDrilling tool geometry evaluation for reinforced composite laminates
In this work, a comparative study on different drill point geometries and feed rate for composite laminates drilling is presented. For this goal, thrust force monitoring during drilling, hole wall roughness measurement and delamination extension assessment after drilling is accomplished. Delamination is evaluated using enhanced radiography combined with a dedicated computational platform that i...
متن کاملDeveloping a Mode Ii Fracture Model for Composite Laminates
Delamination is a critical form of failure in composite laminates which is partitioned into a combination of three pure modes namely; opening, shearing and tearing (modes I, II and III respectively). Each fracture mode contributes to the total energy required for delamination growth, due to a combination of the different damage mechanisms that occur under each mode 1-2 . To formulate reliable m...
متن کاملDisbond detection in adhesively bonded composite structures using vibration signatures
This paper presents a structural health monitoring technique based on analysis of the dynamic signature of the structure, which changes as damage occurs, due to alterations in structural properties such as stiffness and damping. Experiments performed on plate specimens and T-joint specimens which had various degrees of damage in the form of delaminations showed that it is possible to quantify t...
متن کامل