Lithography of diamond-like-carbon (DLC) films for use as masters in soft-lithography
نویسندگان
چکیده
Copyright Statement Copyright 2006 Society of Photo-Optical Instrumentation Engineers. This paper was published in SPIE volume 6037: Device and Process Technologies for Microelectonics, MEMS, and Photonics IV and is made available as an electronic reprint with permission of SPIE. One print or electronic copy may be made for personal use only. Systematic or multiple reproduction, distribution to multiple locations via electronic or other means, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper are prohibited.
منابع مشابه
Nanofabrication of Diamond-like Carbon Templates for Nanoimprint Lithography
Diamond like carbon (DLC) films were deposited on Si and then patterned to form 40 nm features as nanoimprint templates. A plasma enhanced chemical vapor deposition (PECVD) system with CH4 precursor was used to deposit DLC films on Si and quartz substrates. These films were then characterized using Raman spectroscopy, atomic force microscopy (AFM), nanoindentation, and contact angle measurement...
متن کاملDurable diamond-like carbon templates for UV nanoimprint lithography.
The interaction between resist and template during the separation process after nanoimprint lithography (NIL) can cause the formation of defects and damage to the templates and resist patterns. To alleviate these problems, fluorinated self-assembled monolayers (F-SAMs, i.e. tridecafluoro-1,1,2,2,tetrahydrooctyl trichlorosilane or FDTS) have been employed as template release coatings. However, w...
متن کاملDiamond-like-carbon (DLC) master creation for use in soft lithography using the Atomic Force Microscope (AFM)
Two and three dimensional polymeric structures at the nano and micro scale are increasingly being incorporated into micro and nano scale devices. Soft lithography can be employed for the creation of templates where a polymer replica can be produced. Obtaining a master is one of the limiting factors in the production of such replicas. This study demonstrates pattern generation on a highly durabl...
متن کاملEffect of Catalyst on the Growth of Diamond-like Carbon by HFCVD
Diamond like carbon (DLC) film was grown by hot filament chemical vapor deposition (HFCVD)technique. In the present work, we investigated the quality of the DLC films groew on the substratesthat were coated with various metal nanocatalysts (Au and Ni). A combination of CH4/Ar/H2 rendersthe growth of carbon nanostructures technique (diamond like carbon). The utilized samples werecharacterized by...
متن کاملNanostructured DLC coatings for self-assembly applications
1 Abstract— The special characteristics and singular properties of diamond-like carbon (DLC) thin films deposited by pulsed DC plasma enhanced chemical vapor deposition (PECVD), such as hardness and wear resistance, are suitable for self assembly applications as protective coating and as nanostructured surfaces. In this master thesis project, nanostructured DLC surfaces will be designed and cha...
متن کامل