POD-Based Economic Model Predictive Control for Heat-Convection Phenomena
نویسندگان
چکیده
In the setting of energy efficient building operation, an optimal boundary control problem governed by a linear parabolic advection-diffusion equation is considered together with bilateral control and state constraints. To keep the temperature in a prescribed range with the less possible heating cost, an economic model predictive control (MPC) strategy is applied. To speed-up the MPC method, a reduced-order approximation based on proper orthogonal decomposition (POD) is utilized. A-posteriori error analysis ensures the quality of the POD models. A numerical test illustrates the efficiency of the proposed strategy.
منابع مشابه
Numerical Simulation and Parametric Reduced Order Modeling of the Natural Convection of Water-Copper Nanofluid
In this article, a coupled computational framework is presented for the numerical simulation of mass transfer under the effects of natural convection phenomena in a field contains water-copper Nano-fluid. This CFD model is build up based on accurate algorithms for spatial derivatives and time integration. The spatial derivatives have been calculated using first order upwind and second order cen...
متن کاملPOD-Based Economic Optimal Control of Heat-Convection Phenomena
In the setting of energy efficient building operation, an optimal boundary control problem governed by the heat equation with a convection term is considered together with bilateral control and state constraints. The aim is to keep the temperature in a prescribed range with the less possible heating cost. In order to gain regular Lagrange multipliers a Lavrentiev regularization for the state co...
متن کاملPOD-Based Multiobjective Optimal Control of Time-Variant Heat Phenomena
In the present paper, a multiobjective optimal control problem governed by a heat equation with time-dependent convection term and bilateral control constraints is considered. For computing Pareto optimal points and approximating the Pareto front, the reference point method is applied. As this method transforms the multiobjective optimal control problem into a series of scalar optimization prob...
متن کاملSingle Walled Carbon Nanotube Effects on Mixed Convection heat Transfer in an Enclosure: a LBM Approach
The effects of Single Walled Carbon Nanotube (SWCNT) on mixed convection in a cavity are investigated numerically. The problem is studied for different Richardson numbers (0.1-10), volume fractions of nanotubes (0-1%), and aspect ratio of the cavity (0.5-2.5) when the Grashof number is equal to 103. The volume fraction of added nanotubes to Water as base fluid are lowers than 1% to make dilute ...
متن کاملOptimization of 3-D natural convection around the isothermal cylinder using Taguchi method
This study discusses the application of Taguchi method in assessing minimum entropy generation and maximum heat transfer rate for natural convection in an enclosure embedded with isothermal cylinder. The simulations were planned based on Taguchi’s L25 orthogonal array with each trial performed under different conditions of position and aspect ratio (AR) of the cylinder. The thermal lattice Bolt...
متن کامل