Development of a biosensor based on laser-fabricated polymer microcantilevers
نویسندگان
چکیده
We develop high-sensitivity biosensors based on microcantilevers. The polymer microcantilevers are fabricated by fast and cost-effective laser machining processes. Polymer film is selected because it gives better sensitivity of deflection measurements than silicon due to its lower Young’s modulus and also its cost is much lower. We demonstrate using these polymer microcantilevers for biological molecular analysis in a DNA hybridization experiment. It is shown that our biosensor is capable of detecting 12 base oligonucleotide with concentrations as low as 0.01 mM. © 2004 American Institute of Physics. [DOI: 10.1063/1.1791731]
منابع مشابه
Highly sensitive polymer-based cantilever-sensors for DNA detection.
We present a technology for the fabrication of cantilever arrays aimed to develop an integrated biosensor microsystem. The fabrication process is based on spin coating of the photosensitive polymer and near-ultraviolet exposure. Arrays of up to 33 microcantilevers are fabricated in the novel polymer material SU-8. The low Young's modulus of the polymer, 40 times lower than that of silicon, enab...
متن کاملIntegration of CMOS Biosensor into a Polymeric Lab-on-a-Chip System
We present an integration approach of a CMOS biosensor into a polymer based microfluidic environment suitable for mass production. It consists of a wafer-level-package for the silicon die and laser bonding process promoted by an intermediate hot melt foil to attach the sensor package to the microfluidic chip, without the need for dispensing of glues or underfiller. A very good condition of the ...
متن کاملFabrication of Resistive E. coli Biosensor Based on ZnO Nanorods and Nanoparticles
In this paper, a biosensor has been fabricated using ZnO nanorods and nanoparticles to detect different concentrations of the E. coli bacteria. The innovation of this paper lies in design and fabrication of the resistive type E Coli bacteria sensor. To make this biosensors, printed circuit board based electrodes are designed and made in an interdigitated shape. Both hydrothermal and drop cast m...
متن کاملLaser bending for high-precision curvature adjustment of microcantilevers
This work describes a laser based technique to adjust curvatures of silicon microcantilevers used for chemical and biological detection. In batch fabricated silicon cantilever arrays used for parallel sensing, it is often desirable that all cantilevers have nearly identical curvatures or flatness. We demonstrate that using the laser technique, it is possible to adjust curvatures by an amount as...
متن کاملPolymer microcantilevers fabricated via multiphoton absorption polymerization
We have used multiphoton absorption polymerization to fabricate a series of microscale polymer cantilevers. Atomic force microscopy has been used to characterize the mechanical properties of microcantilevers with spring constants that were found to span more than four decades. From these data, we extracted a Young’s modulus of E=0.44 GPa for these microscale cantilevers. The wide stiffness rang...
متن کامل