Preparation and Characterization of Axial Gradient Silicon Carbide Fibers with Sinusoidal Electrical Resistivity
نویسندگان
چکیده
Two types of silicon carbide fibers with sinusoidal electrical resistivity were prepared by using different pyrolysis technology. The relationship between the microstructure and the electrical resistivity of these fibers was investigated and compared. The results indicated that carbon layer was the main conductive phase in the SiC fibers obtained by means of one step pyrolysis, whereas a free carbon phase governed the conductivity of the SiC fibers prepared through two step pyrolysis mode.
منابع مشابه
Ohmic Contact with Enhanced Stability to Polycrystalline Silicon Carbide via Carbon Interfacial Layer
The development of electrical contacts to silicon carbide with low specific resistivity and stability is a critical requirement for harsh environment MEMS applications. In this paper, we present a novel method to lower the ohmic contact resistivity and enhance the stability of Pt contacts to polycrystalline 3C-SiC (poly-SiC) operated at elevated temperatures. In particular, nanocrystalline grap...
متن کاملFabrication and Characterization of Polymer Blend Doped With Metal Carbide Nanoparticles for Humidity Sensors
Nanocomposites films of (polymer blend-ceramics) were prepared from (PVA-PAA) blend and (PVA-PAA) blend doped with niobium carbide nanoparticles for humidity sensors have low cost, easy fabrication, high sensitivity, lightweight and high corrosion resistance. The structural, electrical and optical properties of (PVA-PAA-NbC) nanocomposites have been studied. The D.C electrical properties of (PV...
متن کاملUltra-High Temperature Ceramics for solar receivers: spectral and high-temperature emittance characterization
We report on the preparation, room temperature spectral reflectance and high-temperature thermal emittance characterization of different boride and carbide Ultra-High Temperature Ceramics (UHTCs). The investigated samples are compared with a reference material for solar absorber applications, i.e. silicon carbide. We show that spectral and thermal emittance properties of UHTCs are promising for...
متن کاملDiesel Exhaust After-Treatment by Silicon Carbide Fiber Filter
To reduce particulate matter (PM) in diesel exhaust gas, a diesel particulate filter (DPF) has been developed. The thermal durability of existing platinum catalyst-supported DPFs is inadequate. We are focusing on a non-catalytic after-treatment of silicon carbide (SiC) fibers with highly thermal durability. In this study, we simulated the processes of soot deposition and oxidation. Results show...
متن کاملRapid Sintering of Ceramics with Gradient Porous Structure by Asymmetric Thermal Radiation
In this study, thermal radiation was employed for sintering silicon carbide foams that achieved a gradient porous structure. The simultaneous use of graphite and carbon fiber reinforced carbon composite (Cf/C) radiators resulted in an axial temperature gradient of ~600°C along the cylindrical sample, as confirmed by both numerical simulation and experimental measurement. By sintering the cylind...
متن کامل