I.M. Controlling with field oriented techniques
نویسندگان
چکیده
-This paper presents a micro controller based field oriented control 5-level inverter for three phase Induction motor. IGBT is used as power element. Pulse width modulation techniques (PWM), introduced three decades ago, are the most used methods to control the voltage and frequency supplied to electrical AC machines. . A scheme based on 5-level PWM inverter, which control a high performance 8-bit standard microcontroller with gate driver circuit and additional hardware is used, which allows a flexible and economical solution. The output voltage can be varied in a large range and with a good resolution. Experimental data obtained from an induction motor drive will be presented. Key word: FOC, PWM, microcontroller, multilevel inverter, induction motor.
منابع مشابه
Optimizing speed and angle control of stepping motor by using field oriented control
In the present study, field oriented control of step motor implementation has been analyzed sothat it can make a Sensorless control. Efficiency and Facilities of step motor is more than othertypes of electromotor. Therefore, the numbers of mechanisms and different types of turning canbe made into them. Also controlling these motors is easier than other available motors. Steppingmotor has been d...
متن کاملImprovement Performances of Active and Reactive Power Control Applied to DFIG for Variable Speed Wind Turbine Using Sliding Mode Control and FOC
This paper deals with the Active and Reactive Power control of double-fed induction generator (DFIG) for variable speed wind turbine. For controlling separately the active and the reactive power generated by a DFIG, field oriented control (FOC) and indirect sliding mode control (ISMC) are presented. These non linear controls are compared on the basis of topology, cost, efficiency. The main cont...
متن کاملObjects Identification in Object-Oriented Software Development - A Taxonomy and Survey on Techniques
Analysis and design of object oriented is onemodern paradigms for developing a system. In this paradigm, there are several objects and each object plays some specific roles. Identifying objects (and classes) is one of the most important steps in the object-oriented paradigm. This paper makes a literature review over techniques to identify objects and then presents six taxonomies for them. The f...
متن کاملساختار دهی آنی دادههای مکانی ورودی GIS با تأکید بر عارضه راه
An important issue in implementation of a GIS system is preparation of data to be entered in GIS. To produce spatial data for GIS using photogrammetric techniques, conventional method is to apply photogrammetric and GIS systems individually (off-line procedure). This approach is costly, time consuming and somehow unreliable due to the fact that 3D photogrammetric model is not available at the ...
متن کاملAmbient-Oriented Programming in Fractal
Ambient-Oriented Programming (AmOP) comprises a suite of challenges that are hard to meet by current software development techniques. Although Component-Oriented Programming (COP) represents promising approach, the state-of-the-art component models do not provide sufficient adaptability towards specific constraints of the Ambient field. In this position paper we argue that merging AmOP and COP ...
متن کامل