Stability studies of double-base propellants with centralite and malonanilide stabilizers using MO calculations in comparison to thermal studies.
نویسندگان
چکیده
Propellants containing nitrate esters need stabilizers to avoid early decomposition or even explosion during storage. Newly prepared malonanilides M1-M5 were tested in stabilizing double-base propellants (DBPs). Their stabilization was compared with the effect of classical stabilizer N,N'-diethyldiphenyl urea (C1) using both practical thermal stability tests (qualitative and quantitative tests) and theoretical molecular orbital calculations. This research shows that the new stabilizers (malonanilides) have good stabilizing effects. Some of malonanilides e.g. (M5) and (M2) have higher stability effects. Different mechanisms were suggested to explain the role of different stabilizers. Molecular orbital calculations using the semi-empirical program AM1 are performed on the new and classical stabilizers. Correlation was made between the volume (ml) of NO(x), weight loss (wt%), other thermal analyses data, calculated thermodynamic parameters like activation energy (E(a), kJ mol(-1)) of the decomposed propellant samples containing different stabilizers and some of their calculated properties such as HOMO, LUMO energies, the charge distribution and the pi-bond order. The stabilization effect decreases with the increase in HOMO energy. The correlation between the net charge and parameters measured for the stabilization effect shows good accordance. Comparison of the results obtained show that the high electron charge on N atom of the stabilizers and on its benzene ring is the most important factor, but not the only factor governing the stabilization effect of the stabilizers.
منابع مشابه
Evaluation of malonanilides as new stabilizers for double-base propellants.
Five malonanilide derivatives (M1-M5) were prepared by the reaction of ethyl malonate with aniline derivatives. These compounds were investigated as new stabilizers for double-base propellants (DBPs). The evaluation process has been performed through thermal stability tests, thermal analyses measurements (TGA and DSC) and kinetic parameters calculations (E(a)). The results of the new stabilizer...
متن کاملتعیین معادله برتولت طول عمر پیشرانههای بر پایه نیتروسلولز با استفاده از روش پایداری در خلأ نیمه پیوسته
One of the most widely used propellants is nitrocellulose (NC) based on propellant, which is divided into three general groups including single base propellant (SBP), double base propellant (DBP), and triple base propellant (TBP). In this paper, the life time of three types of NC-based propellants has been examined by using the vacuum stability test (VST). In this method, kinetic equations have...
متن کاملبررسی خواص حرارتی و مکانیکی پلی یورتانهای بر پایه GAP
Glycidyl Azide Polymer is one of the most important energetic binders that is used in the composite solid propellant formulation. GAP is a unique binder with a positive heat of formation (+117.2 kJ⁄mol). In addition, GAP has good thermal and physical properties such as low glass transition temperature, low viscosity and high density compared to other energetic binders. GAP can be used as a bin...
متن کاملتعیین پارامترهای جریانیابی در پیشرانههای دوپایه و دوپایه بهبودیافته به کمک رئومتری جریان اسکوئیز
In this work, the rheological parameters such as yield stress, viscosity coefficient and power law index were obtained for a double-base propellants and modified double-base propellants formulations using the Squeeze flow rheometric method. Squeeze Flow test was used to investigate the rheological behavior without wall slip condition, and to determine the temperature dependency of fluidity in d...
متن کاملمقایسه پایداری شیمیایی دو نمونه پیشرانه یک پایه و دوپایه با استفاده از آزمون های کهولت تسریع یافته و روش آنالیز حرارتی DSC
Chemical stability in propellants is important issue. In this article chemical and thermal stability for two kinds of double and single base propellants are investigated. In mass loss test in 90 0C, after 18 days mass loss for both samples is no more than 3%. By stabilizer measurement it was evident that remaining stabilizer content in aged samples are more than 10% in relative to fresh samples...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Journal of hazardous materials
دوره 179 1-3 شماره
صفحات -
تاریخ انتشار 2010