The forced response of choked nozzles and supersonic diffusers
نویسندگان
چکیده
The response of choked nozzles and supersonic diffusers to one-dimensional flow perturbations is investigated. Following previous arguments in the literature, small flow perturbations in a duct of spatially linear steady velocity distribution are determined by solution of a hyper-geometric differential equation. A set of boundary conditions is then developed that extends the existing work to a nozzle of arbitrary geometry. This analysis accommodates the motion of a plane shock wave and makes no assumption about the nozzle compactness. Numerical simulations of the unsteady, quasi-one-dimensional Euler equations are performed to validate this analysis and also to indicate the conditions under which the perturbations remain approximately linear. The nonlinear response of compact choked nozzles and supersonic diffusers is also investigated. Simple analyses are performed to determine the reflected and transmitted waveforms, as well as conditions for unchoke, ‘over-choke’ and unstart. This analysis is also supported with results from numerical simulations of the Euler equations.
منابع مشابه
Choked Flow Characteristics of Subcritical Refrigerant Flowing Through Converging-Diverging Nozzles
This paper presents the experimental results the choked flow characteristics of a subcritical refrigerant through a converging-diverging nozzle. A test nozzle with a throat diameter of 2 mm was designed and developed. The influence of operating conditions on the choked flow characteristics, i.e., the pressure profile and mass flow rate under choked flow conditions are investigated. The results ...
متن کاملThe Effects of Pressure Difference in Nozzle’s two Phase Flow on the Quality of Exhaust Mixture
In the most application of nozzle with gas-liquid two-phase flow, the quality of mixture in exhaust of nozzle is the most important parameter as well as the flow velocity. On the other hand, in some industrial application, such as water injection in forced induction (turbocharged or supercharged) internal combustion engine the spray quality is the main goal of designing. In this case and for im...
متن کاملThermodynamic Modelling of Supersonic Gas Ejector with Droplets
This study presents a thermodynamic model for determining the entrainment ratio and double choke limiting pressure of supersonic ejectors within the context of heat driven refrigeration cycles, with and without droplet injection, at the constant area section of the device. Input data include the inlet operating conditions and key geometry parameters (primary throat, mixing section and diffuser ...
متن کاملFlow structure and acoustics of supersonic jets from conical convergent-divergent nozzles
Conical convergent-divergent (CCD) nozzles represent an important category of supersonic jet-engine nozzles which require variable throat areas and variable exit areas to adapt to a range of operating conditions. CCD nozzles with design Mach numbers of 1.3, 1.5, and 1.65 are examined experimentally over a range of fully expanded Mach numbers from 1.22 to 1.71. The characteristics of the flow an...
متن کاملDsmc Solution of Supersonic Scale to Choked Subsonic Flow in Micro to Nano Channels
In this study, the supersonic and choked subsonic flows through micro/nano channels are investigated using direct simulation Monte Carlo (DSMC) method. The supersonic case is simulated at different Knudsen numbers covering slip to transition flow regimes, while the effects of inlet Mach and back pressure are studied in details. The inlet/outlet pressure boundary conditions are suitably implemen...
متن کامل