( WEB - version ) Final Report of the Project : P - FEM for a Class of Pressure / Density Dependent Plasticity Models with Application to Cold Isostatic Pressing

نویسنده

  • Mordechai Szanto
چکیده

The principal investigators would like to thank their collaborators, research assistants and master students which were incorporated in the research project and essentially contribute to the planned assignments. These are the PhD students Wolfgang Bier (UniK), Ulrich Heisserer (TUM), and Magda Martins-Wagner (UniBW München) as well as the students Idit Cohen, Shachar Koen, and Alexander Ripp. Furthermore, we thank Dr. Mordechai Szanto (BGU, Yosibash's group) and Yakov Illiya-shevich, Boris Zolko and Aaron Gutman (all BGU, Frage's group). Lastly, we have to thank Dr. Alexander Düster (TUM) for being co-worker of the project proposal and advisor during the project period.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

EFFECTS OF HOT ISOSTATIC PRESSING ON THE TENSILE PROPERTIES OF A356 CAST ALLOY

The influences of age hardening and HIP (Hot Isostatic Pressing) on the mechanical properties of A356 (Al 7Si 0.6 Mg) casting alloys were studied. Cast bars were homogenized, heated and maintained at a temperature of 540°C for a duration of 2 hours, followed by rapid cooling in a polymeric solution. The castings were age hardened at 180°C for a duration of 4 hours before being subjected to HIP ...

متن کامل

Investigating the effects of Magnesia addition on properties, phase transformation and microstructure of gelcasted Zirconia bodies

Magnesia Partially Stabilized Zirconia (Mg-PSZ) is the best material for casting nozzles used in steelmaking industry due to high melting point, high mechanical strength, high thermal shock resistance, high toughness, chemical stability and neutrality, which these nozzles should be fabricated using cold isostatic pressing (CIP) method, however wet processing methods such as gelcasting can lead ...

متن کامل

Hardness and Densification Behaviour of Copper and Bronze Powders Compacted with Uniaxial Die and Cold Isostatic Pressing Processes

A. Eksi, Faculty of Engineering and Architecture, Çukurova University, Adana, Turkey, M. K. Kulekci, Faculty of Technical Education, Mersin University, Tarsus, Turkey In this study hardness and densification behaviour of copper and bronze powders under wet bag cold isostatic and uniaxial die pressing processes are examined. In uniaxial pressing the specimens were compacted up to a pressure of 8...

متن کامل

Experimental based finite element simulation of cold isostatic pressing of metal powders

The present work addresses the various ingredients required for reliable finite element simulations of cold isostatic pressing (CIP) of metal powders. A plastic constitutive model for finite deformation is presented and implemented into an explicit finite element (FE) code. The FE implementation is verified so that numerical errors (both temporal and spatial errors) are kept under control. Ther...

متن کامل

Hot and Cold Tensile Behavior of Al 6061 Produced by Equal Channel Angular Pressing and Subsequent Cold Rolling

The full annealing AA6061 aluminum alloy was subjected to severe plastic deformationvia the combination of equal channel angular pressing (ECAP) and cold rolling (CR) in order torefine its microstructure and to improve its mechanical properties. According to the results of hotand cold tensile tests, the combination of ECAP and CR significantly affected the final strengthand ductility of studied...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2006