Method for holographic storage using peristrophic multiplexing.

نویسندگان

  • K Curtis
  • A Pu
  • D Psaltis
چکیده

A method of multiplexing holograms by rotating the material or, equivalently, the recording beams is described. Peristropic (Greek for rotation) multiplexing can be combined with other multiplexing methods to increase the storage density of holographic storage systems. Peristrophic multiplexing is experimentally demonstrated with Du Pont's HRF-150 photopolymer film. We multiplexed a total of 295 holograms in a 38-microm-thick photopolymer film by combining peristrophic multiplexing with angle multiplexing.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Shift-Peristrophic Multiplexing for High Density Holographic Data Storage

Holographic data storage is a promising technology that provides very large data storage capacity, and the multiplexing method plays a significant role in increasing this capacity. Various multiplexing methods have been previously researched. In the present study, we propose a shift-peristrophic multiplexing technique that uses spherical reference waves, and experimentally verify that this meth...

متن کامل

Optimization of a thick polyvinyl alcohol-acrylamide photopolymer for data storage using a combination of angular and peristrophic holographic multiplexing.

The capability of polyvinyl alcohol-acrylamide photopolymer materials to obtain angularly multiplexed holographic gratings has been demonstrated [Appl. Phys. B 76, 851 (2003)]. A combination of two multiplexing methods--peristrophic and angular multiplexing--is used to record 60 holograms. An exposure schedule method is used to optimize the capability of the photopolymerizable holographic mater...

متن کامل

Multiplexing holograms for data page storage as a holographic memory in a PVA/AA photopolymer [6912-39]

Holographic data pages were multiplexed in a PVA/acrylamide photopolymer layer. This material is formed of acrylamide photopolymers which are considered interesting materials for recording holographic memories. A liquid crystal device was used to modify the object beam and store the data pages in the material. Objects with different pixel size have been used to simulate the data pages. A perist...

متن کامل

Peristrophic multiplexed holograms recorded in a low toxicity photopolymer

Multiplexed diffraction gratings were recorded in 300 μm thick layers of biophotopol photopolymer by using two peristrophic multiplexing schemes separately and in combination. In addition, it was shown that riboflavin may be used as polymer initiator in acrylamide photopolymer films and the holographic properties of these films such as diffraction efficiency and dynamic range were compared with...

متن کامل

Storage of 1000 holograms with use of a dual-wavelength method.

We demonstrate the storage of 1000 holograms in a memory architecture that makes use of different wavelengths for recording and readout to reduce the grating decay while retrieving data. Bragg-mismatch problems from the use of two wavelengths are minimized through recording in the image plane and using thin crystals. Peristrophic multiplexing can be combined with angle multiplexing to counter t...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Optics letters

دوره 19 13  شماره 

صفحات  -

تاریخ انتشار 1994