Metal Foaming Investigated by X-ray Radioscopy
نویسندگان
چکیده
The use of X-ray radioscopy for in-situ studies of metal foam formation and evolution is reviewed. Selected results demonstrate the power of X-ray radioscopy as diagnostic tool for metal foaming. Qualitative analyses of foam nucleation and evolution, drainage development, issues of thermal contact, mold filling, cell wall rupture and more are given. Additionally, quantitative analyses based on series of images of foam expansion yielding coalescence rates, density distributions, etc., are performed by dedicated software. These techniques help us to understand the foaming behavior of metals and to improve both foaming methods and foam quality.
منابع مشابه
LCC Resonant Multilevel Converter for X-ray Applications
Medical X-ray appliances use high-voltage power supplies that must be able to work with very different energy requirements. Two techniques can be distinguished in X-ray medical imaging: fluoroscopy and radioscopy. The former involves low power radiation with a long exposure time, while radioscopy requires large power during short radiographic exposure times. Since the converter has to be design...
متن کاملSynchrotron-based radioscopy employing spatio-temporal micro-resolution for studying fast phenomena in liquid metal foams
Investigations of pore coalescence and individual cell wall collapse in an expanding liquid metal foam by means of X-ray radioscopy with spatio-temporal micro-resolution are reported. By using white synchrotron radiation for imaging, the rupture of a film and the subsequent merger of two neighbouring bubbles could be recorded with a time sampling rate of 40000 frames s(-1) (25 micros exposure t...
متن کاملSimulation of Foaming and Deformation for Composite Aluminum Foams
In this study, at the first stage, the rupture criterion of bubbles wall in Aluminum metal foam liquid was investigated by using Lattice Boltzmann. The two phases modeling were accomplished by using a modified Shan-Chen model. This model was run for several bubbles in A356+3wt.%SiC melt system. Then, bubbles morphologies (virtual metallographic) for A356+3wt.%SiC foams were simulated. Results s...
متن کاملInfluence of Different Foaming Conditions on the Mechanical, Physical, and Structural Properties of Polypropylene Foam
In this article, the effects of different foam production times and temperatures on the mechanical, physical, and structural properties of polypropylene (PP) foam has been investigated. The microcellular PP foams were carried out using supercritical carbon dioxide (sc-CO2) as a physical foaming agent in a batch process. The samples were placed in a pressure vessel and were saturated ...
متن کاملSynthesis of Silver Nanoparticles from Spent X-Ray Photographic Solution via Chemical Rreduction
Silver metal was recovered primarily from spent X-ray photographic solution using a horizontal tube furnace. The X-Ray Diffraction (XRD) spectroscopy analysis approved almost 95 percent purity of the recovered silver metal. In the next step, the synthesis of silver nanoparticles from the recovered silver metal proceeded by using chemical reduction method. The proposed method uses e...
متن کامل