Residual deformations in ocular tissues.

نویسندگان

  • Ruoya Wang
  • Julia Raykin
  • Rudolph L Gleason
  • C Ross Ethier
چکیده

Residual deformations strongly influence the local biomechanical environment in a number of connective tissues. The sclera is known to be biomechanically important in healthy and diseased eyes, such as in glaucoma. Here, we study the residual deformations of the sclera, as well as the adjacent choroid and retina. Using freshly harvested porcine eyes, we developed two approaches of quantifying residual deformations in the spherically shaped tissues of interest. The first consisted of punching discs from the posterior wall of the eye and quantifying the changes in the area and eccentricity of these samples. The second consisted of cutting a ring from the equatorial sclera and making stress-relieving cuts in it. Measurements of curvature were made before and after the stress-relieving cuts. Using the first approach, we observed a 42% areal contraction of the choroid, but only modest contractions of the sclera and retina. The observed contractions were asymmetric. In the second approach, we observed an opening of the scleral rings (approx. 10% decrease in curvature). We conclude that residual bending deformations are present in the sclera, which we speculate may be due to radially heterogeneous growth and remodelling of the tissue during normal development. Further, residual areal deformations present in the choroid may be due to the network of elastic fibres in this tissue and residual deformations in the constituent vascular bed. Future studies of ocular biomechanics should attempt to include effects of these residual deformations into mechanical models in order to gain a better understanding of the biomechanics of the ocular wall.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Interactive Residual Stress Modeling for Soft Tissue Simulation

Residual stress is the stress which remains in a deformable body in the absence of external forces. Due to the release of residual stress after cutting, soft tissues will shrink and the wound will open. Thus, to realistically simulate soft tissue deformations due to cutting, a model for the residual stress in a patient body is needed. In this paper we present an interactive method to compute a ...

متن کامل

Characterization of ocular tissues using microindentation and hertzian viscoelastic models.

PURPOSE The authors applied a novel microindentation technique to characterize biomechanical properties of small ocular and orbital tissue specimens using the hertzian viscoelastic formulation, which defines material viscoelasticity in terms of the contact pressure required to maintain deformation by a harder body. METHODS They used a hard spherical indenter having 100 nm displacement and 100...

متن کامل

Finite Element Analysis of Residual Stresses and Deformations in Direct Metal SLS Process

Direct metal SLS processes use a high power laser beam to selectively fuse fully metallic powder to directly produce functional metal components or tooling. As a thermal dynamic process, it inevitably causes thermal stresses, stress-induced deformations and cracking. Understanding these is very important in controlling residual stresses and stress-induced deformations. In this research, the res...

متن کامل

Sensitivity Analysis of Fastenings’ Types on Track's Life-Cycle

During the study for the dimensioning as well as the selection of the individual materials constituting a railway track, the ballast and the substructure present residual deformations, directly related to the deterioration of the geometry of the track. The slighter the residual deformations and the slower their alteration over time is, the better the quality of the track. The actions acting ...

متن کامل

On the Rule of Mixtures for Predicting Stress-Softening and Residual Strain Effects in Biological Tissues and Biocompatible Materials

In this work, we use the rule of mixtures to develop an equivalent material model in which the total strain energy density is split into the isotropic part related to the matrix component and the anisotropic energy contribution related to the fiber effects. For the isotropic energy part, we select the amended non-Gaussian strain energy density model, while the energy fiber effects are added by ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Journal of the Royal Society, Interface

دوره 12 105  شماره 

صفحات  -

تاریخ انتشار 2015