Control of Underactuated Manipulation by Real-Time Nonlinear Optimization
نویسندگان
چکیده
Underactuated manipulation is the process of controlling a large number of object degrees-of-freedom with fewer robot degrees-of-freedom. The challenge is to derive motion planners and feedback controllers to control underactuated manipulation. In this paper we study the use of real-time nonlinear optimization for motion planning and feedback control of planar batting manipulation with a one-joint robot. We study two tasks: cyclic juggling of a disk, and control of a disk from one six-dimensional state to another by a sequence of three bats. We show analytically and experimentally that the juggling controller yields a stable limit cycle with a large basin of attraction. The experimental results for state-to-state control are less successful and indicate that more accurate modeling of the impact and flight dynamics are required.
منابع مشابه
Time-Invariant State Feedback Control Laws for a Special Form of Underactuated Nonlinear Systems Using Linear State Bisection
Linear state bisection is introduced as a new method to find time-invariant state feedback control laws for a special form of underactuated nonlinear systems. The specialty of the systems considered is that every unactuated state should be coupled with at least two directly actuated states. The basic idea is based on bisecting actuated states and using linear combinations with adjustable parame...
متن کاملNonlinear Model Predictive Control of Robots, Cranes and Vehicles
The main goal of the paper is to show that nonlinear model based predictive control is an effective alternative method for controlling uncertain nonlinear underactuated systems satisfying real time expectations where uncertainty is caused by friction and disturbance. The paper presents control algorithms for a two degree of freedom robot and for two underactuated systems, the small size model o...
متن کاملImproved Optimization Process for Nonlinear Model Predictive Control of PMSM
Model-based predictive control (MPC) is one of the most efficient techniques that is widely used in industrial applications. In such controllers, increasing the prediction horizon results in better selection of the optimal control signal sequence. On the other hand, increasing the prediction horizon increase the computational time of the optimization process which make it impossible to be imple...
متن کاملXXI ICTAM, 15–21 August 2004, Warsaw, Poland BIDIRECTIONAL PATH PLANNING FOR UNDERACTUATED MANIPULATORS USING A DISCRETE-TIME APPROACH
For more than a decade underactuated manipulators have been under investigation, cf. [1]. Investigation of underactuated manipulators is of interest because both path planning and control is possible only if the nonlinear dynamic couplings between the links are taken into account. From a practical point of view, major benefits of underactuated manipulation systems are reduction of weight, costs...
متن کاملOptimal Fuzzy Control of Nonlinear Systems with Application to an Underactuated Robot
To deal with complex nonlinear systems such as underactuated mechanisms, in this paper a global stable as well as optimal fuzzy controller is presented to achieve output tracking control of nonlinear systems by combining the linear optimal control theory and linear regulator theory with the Takagi-Sugeno fuzzy methodology. The stability of the entire closed-loop fuzzy system is ensured by the L...
متن کامل