Electrooxidation as a Pretreatment Process Before Cyanidation

نویسنده

  • Fatma Arslan
چکیده

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Improvement of Gold Leaching from a Refractory Gold Concentrate Calcine by Separate Pretreatment of Coarse and Fine Size Fractions

A total gold extraction of 70.2% could only be reached via direct cyanidation from a refractory As-, Sand C-bearing gold concentrate calcine, and the gold extraction varied noticeably with different size fractions. The reasons for unsatisfactory gold extraction from the calcine were studied through analyses of chemical composition, chemical phase and SEM-EDS of different sizes of particles. It ...

متن کامل

بررسی کارایی فرآیند الکترو/آهن دوظرفیتی/پرسولفات در تصفیه فاضلاب صنعتی

Background and purpose: In Electro/Fe2+/persulfate process, persulfate radicals are produced as powerful oxidizing agents which increase the efficiency of this process. The aim of this study was to investigate the efficiency removal of COD, TSS and dye from industrial effluent in Buali industrial area in Hamedan. Materials and methods: In this study, the batch experiment was performed using a ...

متن کامل

Copper and Cyanide Recovery in Cyanidation Effluents

Cyanidation is the main process for gold and silver recovery from its ores. In this study, a process is proposed to recover copper and cyanide from barren solutions from the Merrill-Crowe cementation process with zinc dust. This technology is based on inducing nucleated precipitation of copper and silver in a serpentine reactor, using sodium sulfide as the precipitator, and sulfuric acid for pH...

متن کامل

Effects of Pretreatment Prior to Electroless Ni-P Plating on Fatigue Behavior of SAE 1045 Steel

Electroless Ni-P (EN) plating, as an important group of metallic coatings, employed in a wide range of industrial applications. The current work aims to investigate the effects of pretreatment process before EN plating on fatigue behavior of SAE 1045 steel. The specimens of rotating bending fatigue test were prepared from the steel in two series. A group of samples used in as-polished con...

متن کامل

Speciation and quantification of surface gold in carbonaceous matter by TOFSIMS: a new approach in characterizing losses during the gold recovery process

An increasing number of low-grade gold ore deposits are characterized by the presence of gold as solid solution into the mineral matrix of sulphide minerals which is not directly amenable to gold cyanidation. In order to liberate this submicroscopic gold the ore has to be oxidized before being subjected to gold cyanidation and exctraction. This is mainly done by autoclave pressure oxidation (AC...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2017