Development of a Test-rig for a Modern Motorcycle Engine
نویسنده
چکیده
This paper presents experimental activities that have been performed in the Automotive Engineering Centre laboratories in Universiti Malaysia Pahang for developing a test-rig based on a modern motorcycle engine. The experimental engine test-rig was developed based on an eddy current dynamometer which was coupled to a four-stroke singlecylinder SI motorcycle engine. Moreover, the test-rig consists of all the measurement equipment, sensors and auxiliaries kits for carrying out engine testing in a sufficient way. The results of these activities have been used for validation of a one-dimensional model developed based on that single cylinder engine. Both the in-cylinder pressure trace and brake torque were used to validate the engine model. There was good agreement between the simulation and experimental results. The constructed test-rig can be utilized for further research and development programs.
منابع مشابه
An Experimental Study for Performance and Emissions of a Small Four-stroke Si Engine for Modern Motorcycle
The performance and emissions of a spark-ignited, port-injected, gasoline-fuelled, water-cooled, small-size modern motorcycle engine were investigated. For this purpose, an experimental test-rig was built up utilizing a small motorcycle engine for carrying out the practical tests. Experimental tests were performed for a range of engine speeds, various air-fuel ratios with a WOT condition and fi...
متن کاملStatic and dynamic properties of a motorcycle frame: experimental and numerical approach
It is well known how the main frame of a motorcycle plays an important rule in vehicle dynamics. In order to understand the main influences of this component, a dedicated test rig was design and realized. Numerical and experimental experiences were done with the aim to identify static stiffness, natural frequencies and vibration modes of a motorcycle frame. A dedicated test rig was designed and...
متن کاملA New Oblique Impact Test for Motorcycle Helmets
A new oblique impact test for motorcycle helmets is described, simulating a fall from a motorcycle on to the road surface or the windshield of a car. An instrumented headform falls vertically to impact a horizontally-moving rigid rough or deformable surface. Both the impact site on the helmet, and the vertical and horizontal velocities, can be varied, while linear and rotational accelerations o...
متن کاملPerformance Analysis of Different Modified MR Engines Mounts
Increasing current vehicle development trends for small, light, front wheel drive vehicles with low idle speeds have been forced automotive industries to use hydraulic engine mounts for further improvement in vibration, noise and harshness (NVH) performance of the vehicles. However, with the development of modern vehicle designs such as hybrid vehicles and variable engine management systems whi...
متن کاملPreliminary results on dynamic analysis of a new test rig for wheel-rail contact studies
A new reduced–scale test rig is developed owing to significantly contribute to the applicability of the laboratory tests on rolling contact fatigue (RCF) in wheel-rail material. This paper introduces the dynamic analysis of the test rig, in order to assess the vibration behaviour of the system with respect to contact phenomenon. Finite element modelling (FEM) is used to simulate the mecha...
متن کامل