Change in color of a maxillofacial prosthetic silicone elastomer, following investment in molds of different materials

نویسندگان

  • Tania Sethi
  • Mohit Kheur
  • Trevor Coward
  • Naimesha Patel
چکیده

PURPOSE In the authors' experience, the color of silicone elastomer following polymerization in molds made of gypsum products is slightly different from the color that was matched in the presence of the patient, before the silicone is packed. It is hypothesized that the investing materials and separating media have an effect on the color during the polymerization process of the silicone. MATERIALS AND METHODS This study compares and evaluates the change in color of silicone elastomer packed in three commonly used investing materials - Dental stone (white color), dental stone (green color), and die stone (orange color); coated with three different separating media - Alginate-based medium, soap solution and a resin-based die hardening material. Pigmented silicone samples of dimensions 1.5 cm × 2 cm × 0.5 cm were made from the elastomer in the above-mentioned mold materials using combinations of the mentioned separating media. These served as test group samples. Control group samples were made by packing a mix of the same pigmented elastomer in stainless steel molds. The L*, a*, b* values of the test and control group samples were determined using a spectrophotometer. The change in color (Delta E) was calculated between the control and test groups. RESULTS The mean L, a, b values for the control group were, 31.8, 26.2, and 36.3, respectively. Average values of change in color (Delta E) for samples packed utilizing alginate-based medium, die hardener, and soap solution, respectively in white dental stone (2.70, 2.74, and 2.88), green dental stone (2.19, 2.23, 2.42), and orange die stone (3.19, 2.72, 2.80) were tabulated. CONCLUSION Among the investing materials studied, die stone showed the most color change (3.19), which was statistically significant. Among the separating media, die hardener showed the least color change (2.23). The best combination of an investing material and separating media as per this investigation is a dental stone (green) and alginate-based separating medium.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Evaluation of the effect of ultraviolet stabilizers on the change in color of a silicone elastomer following aging by three different methods: An in vitro study

Aim and Objective: To compare and evaluate the effect of ultraviolet (UV) stabilizers (UV absorbers [UVA] and hindered amine light stabilizers [HALS]) on the color change of a commonly used silicone elastomer subjected to aging by three different methods. Materials and Methodology: Four groups of 30 samples each were studied; Group A-Control, Group B-Silicone + UVA (Chimassorb 81), Group C-Sili...

متن کامل

Development of a 3D printable maxillofacial silicone: Part I. Optimization of polydimethylsiloxane chains and cross-linker concentration.

STATEMENT OF PROBLEM Conventionally, maxillofacial prostheses are fabricated by hand carving the missing anatomic defect in wax and creating a mold into which pigmented silicone elastomer is placed. Digital technologies such as computer numerical control (CNC) milling and 3-dimensional (3D) printing have been used to prepare molds directly or indirectly into which a biocompatible pigmented sili...

متن کامل

The Effect of Different Storage Conditions on the Physical Properties of Pigmented Medical Grade I Silicone Maxillofacial Material

Objective. This study aimed to evaluate the effect of different storage solutions that simulate acidic, alkaline, and sebum conditiions on the physical properties of pigmented (colorant elastomer) cosmesil M511 maxillofacial prosthetic material. Materials and Methods. Sixty specimens were prepared according to the manufacturer's instructions and were tested before and after immersion of differe...

متن کامل

Color stability and colorant effect on maxillofacial elastomers. Part III: weathering effect on color.

STATEMENT OF PROBLEM Maxillofacial prostheses are serviceable for approximately 6 months, after which they need to be refabricated because of the deterioration of color and physical properties. PURPOSE This third article in a 3-part series evaluated the color stability of commonly used colorant-elastomer combinations as a result of exposure to weathering. METHODS AND MATERIAL Fifteen specim...

متن کامل

Evaluation of the Effect of 2 Flask Investment Materials on Color Stability of 5 Brands of Denture Teeth

Introduction: The purpose of this study was to investigate the effect of flask investment materials on the color changes of different brands of resin denture teeth. Methods: Resin denture teeth (560) were divided into 2 groups according to the materials used for flask investment (silicone or gypsum). All the specimens were thermocycled between 4°C and 60°C with 60-s dwell times for 1,000 cycles...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 15  شماره 

صفحات  -

تاریخ انتشار 2015